Talaria XXX Graphics Kit
Try a design on the XXX, then make it yours with AI, your logos and your race number.
Talaria XXX Graphics Designs
6 kits to start from on the XXX. Pick one above to preview it, then recolor it, add your number or make it your own XXX graphics.
Talaria Dirt Bike Graphics
The Talaria XXX is a lightweight electric trail bike with simple, flat side covers. With no exhaust or radiator, the battery-side panels are the main surface for a design.
Flat covers keep artwork undistorted, so a Talaria XXX graphics kit can carry large shapes, a name or a full pattern. E-bike plastics differ between models and years, so confirm your panels before you order.
- Battery-side covers
- Flat and simple. The best spot for big artwork.
- Front fender
- A spot to repeat the main color.
- Headlight plate
- Keep the area around the light clean.
- Rear fender
- Room for a name or number.
2D previewDesign Your Own XXX Graphics in the Editor
The editor shows the flat XXX kit sheet next to a live view of the bike. Place a design, paint single panels, type your number or drop in a logo, and the bike updates as you work.
- Flip between the left and right side
- Mirror artwork across
- Gloss, matte, chrome or holographic
Neon green lightning on a midnight base
2D previewCustom XXX Graphics with AI
Describe the kit you want or upload a reference photo, and the AI lays out a full, mirrored XXX kit. Every AI design stays editable. Have your print shop check the final dimensions and cut lines.
- 10 credits from text
- 20 credits from a photo
- Mirrored on both sides
XXX Graphics Fitment Guide
Choose your model year below. These are design reference years, not a promise that one cut template fits every year. Match your installed plastics to a model-specific template with your printer.
| Year | Before printing |
|---|---|
| 2026 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2025 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2024 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2023 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2022 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
The bike image is an illustrative design preview. Exported artwork needs sizing and cut-line review before production; printing and vinyl are supplied by your print shop.
Talaria XXX Graphics Kit Panels
The design sheet organizes artwork by panel, with matching left and right pieces to review with your printer. Check the artwork placement on the bike preview before exporting your design.
- 1Main side panelsthe main body covers, radiator shrouds or battery-side surfaces, depending on the model
- 2Upper body coverssmaller bodywork areas near the seat; check the fitted covers on your exact bike
- 3Front fenderlong and curved, read from above and from the front
- 4Front number platethe plate on the forks, where your number or headlight surround goes
- 5Fork guardsnarrow pieces that pick up color from the main kit
- 6Swingarm decalslong strips that protect the swingarm and carry a name or a small logo
- 7Seat coverprinted or plain, and a good spot for a brand or a stripe
- 8Rear fenderlong and tapered, the last thing riders behind you see
XXX Design Guide
Three short guides written for the XXX: how to plan the kit, where numbers go, and how to match it to your riding.
Designing a Talaria XXX graphics kit, step by step
The XXX is a simple, lightweight trail bike, and the best kits for it usually respect that simplicity. Start with the flat battery-side covers, which are the only large surfaces, and decide whether they get one bold graphic, a pattern, or a clean two-tone split. The stock dark gray, with lighter gray frame and rim hints in the preview, pairs easily with lime, cyan, orange or pink. Then carry one accent color to the front fender and keep the headlight plate plain, so the bike still looks tidy from the front. Mirror both sides. Since panels can vary by model year and aftermarket bodywork is common, check that the preview shape matches your covers. Finally, check both sides in the preview and zoom out.
Race numbers and sponsor logos on the Talaria XXX
Most XXX owners ride trails rather than race, so numbers are often optional. If you do enter events, check the rules for plate colors and placement first. On the flat side covers, a large number or name stays undistorted, so you can use a bigger font size than on more curved bodywork. A clean, sans-serif font in a bright color suits the bike's simple style. If you would rather not run a number, consider a short name, an initial or a small icon instead. Sponsor logos, often from the shop that sold or serviced your bike, fit on the front fender and rear fender. Keep the headlight plate clear. A minimal layout with one or two logos looks more deliberate than a crowded one.
Making the most of the Talaria XXX's electric look
The XXX's simple shape is an advantage: a kit with one strong idea looks clean and modern instead of busy. Gradients that fade across the side covers, a single lightning bolt, or a bold two-color split all suit the bike. Trail riders often favor camo or darker tones that hide scratches from branches and drops, while riders who mostly ride with friends on dirt tracks may prefer bright colors. Talaria XXX graphics also pair well with colored rims, grips or a seat cover in your accent color. Matte laminates give a premium look and reduce glare in photos. Remember that panels vary by year and aftermarket bodywork is common, so confirm your exact covers and setup before you order.
XXX Color Ideas
Three palettes shown on the bike. Apply one in the editor and keep designing from there.
Trail gray
Stock-inspired grays.
Electric lime
Black with lime accents.
Pink camo
Soft pinks with a dark base.
How to Install Talaria XXX Graphics
You need a heat gun or hair dryer, a squeegee and isopropyl alcohol. Plan an hour or two for a full XXX kit.
- 01Take the plastics offRemove the shrouds, fenders and plates from the XXX and work on a clean bench. Loose panels are far easier to wrap than panels on the bike.
- 02Strip the old decalsWarm old graphics with a heat gun or hair dryer and peel them slowly at a low angle. Remove leftover adhesive with an adhesive remover.
- 03Clean and degreaseWash the plastics, then wipe them with isopropyl alcohol so no oil or silicone is left. Let them dry completely.
- 04Line up each graphicPeel back only the first few centimeters of backing, line the graphic up against the panel's edges and holes, and tack it down.
- 05Lay it from the middle outPull the backing off as you go and push the vinyl down from the center outward with a squeegee or your thumb, chasing air toward the edges.
- 06Heat the curves and edgesWarm the vinyl around tight curves and edges so it stretches and settles, then press the edges down firmly. Keep the bike unplugged and cool. The flat covers are easy to apply: clean, dry fit, and work from the center out to push air to the edges.
Cost of a Custom Talaria XXX Graphics Kit
Designing a XXX kit costs nothing. You only spend credits on AI designs and on the clean HD export you send to the printer. Printing is paid to the shop you choose.
Styles That Suit the XXX
Talaria XXX Graphics Kit FAQ
01Which bikes does this Talaria XXX graphics kit fit?
This is an artwork preview for the Talaria XXX. Model years 2022–2026 are design references, not certified template compatibility. Have your printer confirm the exact year, installed plastics and cut lines. The Sting and Komodo have their own page and kit.
02Will this kit fit an older XXX?
The model-year guide lists references for 2022–2026. Do not infer fit for an older bike from the preview. Check its installed plastics and a matching printer template before production.
03Do Talaria XXX decals fit the Sting?
No. The two use different panels, and e-bike plastics also change between years. Confirm your panels before ordering.
04What designs suit the XXX?
Camo hides trail scratches, while lightning and gradients give it a modern electric look.
05Are XXX graphics the same as XXX decals or a wrap?
Riders use all three words for the same thing: printed, die-cut vinyl that covers the XXX's plastics. A "kit" means the full set of panels designed to work together.
06Can I see the XXX kit on the bike before I pay?
Yes. Designing and previewing are free. The 2D preview includes a front angle and a mirrored view; models with a 3D viewer can also be rotated in the designer.
07Can I add my race number and name to the XXX?
Yes. Type it in the Text panel and place it on the plates in one click. Numbers read the right way on both sides of the bike, and you can add a name across the rear fender or the shrouds.
08Can I put my own logo or artwork on the kit?
Yes. Upload a sponsor logo, team badge or photo, place it on any panel, then scale, rotate and recolor it.
09Can I leave some panels plain?
Yes. Paint any panel a solid color, or clear the artwork from it. Plain plastics next to a busy shroud graphic often look the most professional.
10What do I get with the HD export?
Clean high-resolution preview images and a flat artwork sheet without a watermark. The XXX export costs 30 credits; confirm physical dimensions and cut lines with your printer before printing.
11Is this a XXX graphics kit I design myself?
Yes. You design it here, export the HD sheet, and have it printed and cut by the print shop of your choice. That keeps you in control of the design, the vinyl and the price.
12Can I share my XXX design?
Yes. Create a share card or a link, and anyone can open the design and see it on the bike.
13How much does an AI design cost?
10 credits from a text prompt, or 20 credits from a photo. Credits come in one-time packs, from 200 credits for $9.90.
14Do credits expire?
No. Credits are a one-time purchase with no subscription, and they never expire.
More Talaria graphics
Other Talaria models you can design kits for — same brand family, separate fitment.
Popular styles for the XXX
Related guides
A practical workflow for designing a full graphics kit: picking a base, building contrast, placing numbers and logos, and checking both sides.
Washing, storage and riding habits that keep a graphics kit looking new for more seasons.
Contrast, size and font tips so your number is readable at speed.
Prep, heat and squeegee technique for a clean graphics install on motocross plastics.
Explore more
Related bikes
Start your XXX kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing