Sur-Ron Storm Bee Graphics Kit
Try a design on the Storm Bee, then make it yours with AI, your logos and your race number.
Sur-Ron Storm Bee Graphics Designs
6 kits to start from on the Storm Bee. Pick one above to preview it, then recolor it, add your number or make it your own Storm Bee graphics.
Sur-Ron Dirt Bike Graphics
The Storm Bee is Sur-Ron's full-size electric off-roader, with larger bodywork than the Light Bee. There's no exhaust, so the battery-side panels form a clean, broad canvas on each side.
Bigger panels mean a Storm Bee graphics kit can carry large numbers and full-coverage patterns. E-bike plastics differ between models and years, so confirm your panels before you order.
- Battery-side panels
- The main canvas. Broad and clean for full-coverage designs.
- Front shrouds
- Good for designs that flow back toward the battery area.
- Front fender
- A spot to repeat the main color or pattern.
- Rear fender
- Room for a name or a number.
2D previewDesign Your Own Storm Bee Graphics in the Editor
The editor shows the flat Storm Bee kit sheet next to a live view of the bike. Place a design, paint single panels, type your number or drop in a logo, and the bike updates as you work.
- Flip between the left and right side
- Mirror artwork across
- Gloss, matte, chrome or holographic
Neon green lightning on a midnight base
2D previewCustom Storm Bee Graphics with AI
Describe the kit you want or upload a reference photo, and the AI lays out a full, mirrored Storm Bee kit. Every AI design stays editable. Have your print shop check the final dimensions and cut lines.
- 10 credits from text
- 20 credits from a photo
- Mirrored on both sides
Storm Bee Graphics Fitment Guide
Choose your model year below. These are design reference years, not a promise that one cut template fits every year. Match your installed plastics to a model-specific template with your printer.
| Year | Before printing |
|---|---|
| 2026 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2025 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2024 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2023 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2022 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
The bike image is an illustrative design preview. Exported artwork needs sizing and cut-line review before production; printing and vinyl are supplied by your print shop.
Sur-Ron Storm Bee Graphics Kit Panels
The design sheet organizes artwork by panel, with matching left and right pieces to review with your printer. Check the artwork placement on the bike preview before exporting your design.
- 1Main side panelsthe main body covers, radiator shrouds or battery-side surfaces, depending on the model
- 2Upper body coverssmaller bodywork areas near the seat; check the fitted covers on your exact bike
- 3Front fenderlong and curved, read from above and from the front
- 4Front number platethe plate on the forks, where your number or headlight surround goes
- 5Fork guardsnarrow pieces that pick up color from the main kit
- 6Swingarm decalslong strips that protect the swingarm and carry a name or a small logo
- 7Seat coverprinted or plain, and a good spot for a brand or a stripe
- 8Rear fenderlong and tapered, the last thing riders behind you see
Storm Bee Design Guide
Three short guides written for the Storm Bee: how to plan the kit, where numbers go, and how to match it to your riding.
Designing a Sur-Ron Storm Bee graphics kit, step by step
The Storm Bee is closer in size to a full motocross bike than to the smaller e-bikes, and that changes how you should design for it. Think in big, confident shapes, because fine patterns get lost on panels this broad. Start with the battery-side panels, then pull the design forward onto the front shrouds so the lines flow from the front of the bike to the seat. The stock dark gray, with light gray frame and rim hints in the preview, works well with stripes, blocks and colors borrowed from gas motocross bikes. Mirroring is easy without an exhaust to work around. Panels can differ between model years and aftermarket bodywork is common, so check that the preview matches your bike before you finish.
Race numbers and sponsor logos on the Sur-Ron Storm Bee
The Storm Bee's large side panels make it easy to run proper race numbers, so take advantage of the space. If you race in an electric or open class, check the rules for plate colors and number placement. A bold, wide font in a bright color, with strong contrast against the dark base, reads clearly from across the track. The front shrouds and rear fender work well for sponsor logos, which often come from e-bike shops, tuners or parts brands. Keep every logo in one uniform color, such as white or neon, so they stand out without competing with each other. If you do not race, the side panels are a great place for a name or a large personal graphic instead of a number.
Making the most of the Sur-Ron Storm Bee's electric look
The Storm Bee sits between the light e-bike scene and full-size off-road riding, so the design can lean in either direction. A motocross-style kit with stripes and numbers makes it look like a factory racer, while an electric theme with lightning, honeycomb or a gradient highlights what makes it different from gas bikes. Its broad battery-side panels are ideal for one big uninterrupted graphic, the kind an exhaust pipe would cut in half on a combustion bike. If you ride mostly in the woods, forest camo tones hide scratches and suit the trail setting. Storm Bee graphics also look sharp with colored rims or a matching seat cover. Remember that panels vary by year and aftermarket bodywork is common, so confirm your setup first.
Storm Bee Color Ideas
Three palettes shown on the bike. Apply one in the editor and keep designing from there.
Storm gray
Stock-inspired gray with cyan.
Neon storm
Black with neon highlights.
Forest
Trail-friendly camo tones.
How to Install Sur-Ron Storm Bee Graphics
You need a heat gun or hair dryer, a squeegee and isopropyl alcohol. Plan an hour or two for a full Storm Bee kit.
- 01Take the plastics offRemove the shrouds, fenders and plates from the Storm Bee and work on a clean bench. Loose panels are far easier to wrap than panels on the bike.
- 02Strip the old decalsWarm old graphics with a heat gun or hair dryer and peel them slowly at a low angle. Remove leftover adhesive with an adhesive remover.
- 03Clean and degreaseWash the plastics, then wipe them with isopropyl alcohol so no oil or silicone is left. Let them dry completely.
- 04Line up each graphicPeel back only the first few centimeters of backing, line the graphic up against the panel's edges and holes, and tack it down.
- 05Lay it from the middle outPull the backing off as you go and push the vinyl down from the center outward with a squeegee or your thumb, chasing air toward the edges.
- 06Heat the curves and edgesWarm the vinyl around tight curves and edges so it stretches and settles, then press the edges down firmly. Keep the bike unplugged and cool. Dry fit the large panels first and mark the bolt holes, then apply from the center out and let the adhesive cure for a day before riding.
Cost of a Custom Sur-Ron Storm Bee Graphics Kit
Designing a Storm Bee kit costs nothing. You only spend credits on AI designs and on the clean HD export you send to the printer. Printing is paid to the shop you choose.
Styles That Suit the Storm Bee
Sur-Ron Storm Bee Graphics Kit FAQ
01Which bikes does this Sur-Ron Storm Bee graphics kit fit?
This is an artwork preview for the Sur-Ron Storm Bee. Model years 2022–2026 are design references, not certified template compatibility. Have your printer confirm the exact year, installed plastics and cut lines. The Light Bee X and Ultra Bee have their own page and kit.
02Will this kit fit an older Storm Bee?
The model-year guide lists references for 2022–2026. Do not infer fit for an older bike from the preview. Check its installed plastics and a matching printer template before production.
03Do Storm Bee decals fit the Light Bee X?
No. The Storm Bee is a larger bike with different panels. E-bike plastics differ between models and years, so design on the exact bike.
04What styles suit the Storm Bee?
Lightning, camo and honeycomb are popular, and the big side panels also suit a large name or number.
05Are Storm Bee graphics the same as Storm Bee decals or a wrap?
Riders use all three words for the same thing: printed, die-cut vinyl that covers the Storm Bee's plastics. A "kit" means the full set of panels designed to work together.
06Can I see the Storm Bee kit on the bike before I pay?
Yes. Designing and previewing are free. The 2D preview includes a front angle and a mirrored view; models with a 3D viewer can also be rotated in the designer.
07Can I add my race number and name to the Storm Bee?
Yes. Type it in the Text panel and place it on the plates in one click. Numbers read the right way on both sides of the bike, and you can add a name across the rear fender or the shrouds.
08Can I put my own logo or artwork on the kit?
Yes. Upload a sponsor logo, team badge or photo, place it on any panel, then scale, rotate and recolor it.
09Can I leave some panels plain?
Yes. Paint any panel a solid color, or clear the artwork from it. Plain plastics next to a busy shroud graphic often look the most professional.
10What do I get with the HD export?
Clean high-resolution preview images and a flat artwork sheet without a watermark. The Storm Bee export costs 30 credits; confirm physical dimensions and cut lines with your printer before printing.
11Is this a Storm Bee graphics kit I design myself?
Yes. You design it here, export the HD sheet, and have it printed and cut by the print shop of your choice. That keeps you in control of the design, the vinyl and the price.
12Can I share my Storm Bee design?
Yes. Create a share card or a link, and anyone can open the design and see it on the bike.
13How much does an AI design cost?
10 credits from a text prompt, or 20 credits from a photo. Credits come in one-time packs, from 200 credits for $9.90.
14Do credits expire?
No. Credits are a one-time purchase with no subscription, and they never expire.
Related bikes
Start your Storm Bee kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing