Stark Varg MX Graphics Kit
Try a design on the Varg MX, then make it yours with AI, your logos and your race number.
Stark Varg MX Graphics Designs
6 kits to start from on the Varg MX. Pick one above to preview it, then recolor it, add your number or make it your own Varg MX graphics.
Stark Dirt Bike Graphics
The Stark Varg MX is a full-size electric motocross bike. With no gearbox or exhaust, its body is shaped around a battery, which gives it smooth, uninterrupted side panels.
Electric bikes invite futuristic designs: lightning, neon accents, hex patterns and galaxy art all suit the Varg, though classic race kits look great on it too.
- Radiator shrouds
- Smooth surfaces. Large graphics stay clean.
- Side areas
- No exhaust to dodge on the right side.
- Rear fender
- Room for a name or number.
- Front plate
- Neon numbers on a dark plate look electric.
2D previewDesign Your Own Varg MX Graphics in the Editor
The editor shows the flat Varg MX kit sheet next to a live view of the bike. Place a design, paint single panels, type your number or drop in a logo, and the bike updates as you work.
- Flip between the left and right side
- Mirror artwork across
- Gloss, matte, chrome or holographic
Neon green lightning on a midnight base
2D previewCustom Varg MX Graphics with AI
Describe the kit you want or upload a reference photo, and the AI lays out a full, mirrored Varg MX kit. Every AI design stays editable. Have your print shop check the final dimensions and cut lines.
- 10 credits from text
- 20 credits from a photo
- Mirrored on both sides
Varg MX Graphics Fitment Guide
Choose your model year below. These are design reference years, not a promise that one cut template fits every year. Match your installed plastics to a model-specific template with your printer.
| Year | Before printing |
|---|---|
| 2026 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2025 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2024 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2023 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
The bike image is an illustrative design preview. Exported artwork needs sizing and cut-line review before production; printing and vinyl are supplied by your print shop.
Stark Varg MX Graphics Kit Panels
The design sheet organizes artwork by panel, with matching left and right pieces to review with your printer. Check the artwork placement on the bike preview before exporting your design.
- 1Main side panelsthe main body covers, radiator shrouds or battery-side surfaces, depending on the model
- 2Upper body coverssmaller bodywork areas near the seat; check the fitted covers on your exact bike
- 3Front fenderlong and curved, read from above and from the front
- 4Front number platethe plate on the forks, where your number or headlight surround goes
- 5Fork guardsnarrow pieces that pick up color from the main kit
- 6Swingarm decalslong strips that protect the swingarm and carry a name or a small logo
- 7Seat coverprinted or plain, and a good spot for a brand or a stripe
- 8Rear fenderlong and tapered, the last thing riders behind you see
Varg MX Design Guide
Three short guides written for the Varg MX: how to plan the kit, where numbers go, and how to match it to your riding.
Designing a Varg MX graphics kit, step by step
The Varg MX starts from dark grey plastics, which give neon and bright colors a lot of punch, so many riders keep a dark base and build up from there. Others switch to white for a clean, tech-product feel. Start with the shrouds and the side areas around the battery housing, which on this bike flow into one long, smooth surface with no exhaust to work around. That lets you run a single graphic from the shroud all the way back to the rear fender. Design the right side, mirror it to the left, and enjoy the fact that both sides really can look identical. Set the Frame and Wheels colors to match your bike, then flip the preview to make sure long graphics line up across panel joins.
Race numbers and sponsor logos on the Varg MX
Numbers on the Varg MX go on the front plate and the side panels, and the smooth bodywork makes them easy to place. Electric bikes often race in the same classes as gas bikes, so check your series rules for plate colors; a white background for the open or 450 class is common, while some clubs run separate electric classes with their own rules. Where you have freedom, neon digits on a dark plate look striking and suit the electric theme. Use a bold, modern font with clean geometry, and add a contrasting outline for readability. Main sponsors fit on the upper shrouds, and the flat battery-side panels can carry a large logo or your name. Varg MX graphics with sharp, simple numbers look futuristic without losing readability.
Making the most of the Varg MX's electric look
The Varg MX looks different from every gas bike on the gate, so lean into that. Without an exhaust or the usual engine shapes on the side, the bodywork reads as a single smooth form, which suits long flowing graphics, circuit-board lines, hex grids or bold gradients. Neon green, cyan and purple on a dark base are popular because they feel electric, but a clean white kit with one bright accent looks just as modern. Holographic or chrome accents work especially well on an electric bike, used on logos or number outlines. Because the bike is quiet, many riders use it on practice tracks near homes, where a clean, tidy look matters. Varg MX decals that combine a tech theme with good number readability give the best of both worlds.
Varg MX Color Ideas
Three palettes shown on the bike. Apply one in the editor and keep designing from there.
Volt
Dark navy with neon.
Clean electric
White with cyan accents.
Stealth
Near-black with a single neon accent.
How to Install Stark Varg MX Graphics
You need a heat gun or hair dryer, a squeegee and isopropyl alcohol. Plan an hour or two for a full Varg MX kit.
- 01Take the plastics offRemove the shrouds, fenders and plates from the Varg MX and work on a clean bench. Loose panels are far easier to wrap than panels on the bike.
- 02Strip the old decalsWarm old graphics with a heat gun or hair dryer and peel them slowly at a low angle. Remove leftover adhesive with an adhesive remover.
- 03Clean and degreaseWash the plastics, then wipe them with isopropyl alcohol so no oil or silicone is left. Let them dry completely.
- 04Line up each graphicPeel back only the first few centimeters of backing, line the graphic up against the panel's edges and holes, and tack it down.
- 05Lay it from the middle outPull the backing off as you go and push the vinyl down from the center outward with a squeegee or your thumb, chasing air toward the edges.
- 06Heat the curves and edgesWarm the vinyl around tight curves and edges so it stretches and settles, then press the edges down firmly. The Varg's smooth panels make installation straightforward. Clean thoroughly, apply at room temperature, and give the adhesive a day to cure before washing or riding hard.
Cost of a Custom Stark Varg MX Graphics Kit
Designing a Varg MX kit costs nothing. You only spend credits on AI designs and on the clean HD export you send to the printer. Printing is paid to the shop you choose.
Styles That Suit the Varg MX
Stark Varg MX Graphics Kit FAQ
01Which bikes does this Stark Varg MX graphics kit fit?
This is an artwork preview for the Stark Varg MX. Model years 2023–2026 are design references, not certified template compatibility. Have your printer confirm the exact year, installed plastics and cut lines. The Varg EX has its own page and kit.
02Does the Varg MX kit fit the Varg EX?
Bikes in the same Stark family often have similar plastics, but shapes can differ around the shrouds, side panels and plates. Use the kit made for your exact bike, and check with your printer before using one kit for two bikes.
03Do electric dirt bikes need different graphics?
Not really. The material is the same; only the panel shapes differ. Design on the Varg MX so the kit matches its body.
04What designs suit an electric bike?
Lightning, neon and tech patterns are popular, but anything works. It's your bike.
05Are Varg MX graphics the same as Varg MX decals or a wrap?
Riders use all three words for the same thing: printed, die-cut vinyl that covers the Varg MX's plastics. A "kit" means the full set of panels designed to work together.
06Can I see the Varg MX kit on the bike before I pay?
Yes. Designing and previewing are free. The 2D preview includes a front angle and a mirrored view; models with a 3D viewer can also be rotated in the designer.
07Can I add my race number and name to the Varg MX?
Yes. Type it in the Text panel and place it on the plates in one click. Numbers read the right way on both sides of the bike, and you can add a name across the rear fender or the shrouds.
08Can I put my own logo or artwork on the kit?
Yes. Upload a sponsor logo, team badge or photo, place it on any panel, then scale, rotate and recolor it.
09Can I leave some panels plain?
Yes. Paint any panel a solid color, or clear the artwork from it. Plain plastics next to a busy shroud graphic often look the most professional.
10What do I get with the HD export?
Clean high-resolution preview images and a flat artwork sheet without a watermark. The Varg MX export costs 30 credits; confirm physical dimensions and cut lines with your printer before printing.
11Is this a Varg MX graphics kit I design myself?
Yes. You design it here, export the HD sheet, and have it printed and cut by the print shop of your choice. That keeps you in control of the design, the vinyl and the price.
12Can I share my Varg MX design?
Yes. Create a share card or a link, and anyone can open the design and see it on the bike.
13How much does an AI design cost?
10 credits from a text prompt, or 20 credits from a photo. Credits come in one-time packs, from 200 credits for $9.90.
14Do credits expire?
No. Credits are a one-time purchase with no subscription, and they never expire.
Related bikes
Start your Varg MX kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing