Stark Varg EX Graphics Kit
Try a design on the Varg EX, then make it yours with AI, your logos and your race number.
Stark Varg EX Graphics Designs
6 kits to start from on the Varg EX. Pick one above to preview it, then recolor it, add your number or make it your own Varg EX graphics.
Stark Dirt Bike Graphics
The Stark Varg EX is the enduro version of Stark's electric bike, adding lighting and trail equipment to the same smooth, battery-centered body.
Quiet electric bikes are increasingly popular on trails, and riders tend to give them bold, modern looks. Patterns that hide trail scratches are a smart choice for the lower areas.
- Headlight front plate
- Keep the area around the light clean.
- Radiator shrouds
- Smooth main canvas.
- Side areas
- Uninterrupted surfaces for large art.
- Rear fender
- A spot for a name or club logo.
2D previewDesign Your Own Varg EX Graphics in the Editor
The editor shows the flat Varg EX kit sheet next to a live view of the bike. Place a design, paint single panels, type your number or drop in a logo, and the bike updates as you work.
- Flip between the left and right side
- Mirror artwork across
- Gloss, matte, chrome or holographic
Neon green lightning on a midnight base
2D previewCustom Varg EX Graphics with AI
Describe the kit you want or upload a reference photo, and the AI lays out a full, mirrored Varg EX kit. Every AI design stays editable. Have your print shop check the final dimensions and cut lines.
- 10 credits from text
- 20 credits from a photo
- Mirrored on both sides
Varg EX Graphics Fitment Guide
Choose your model year below. These are design reference years, not a promise that one cut template fits every year. Match your installed plastics to a model-specific template with your printer.
| Year | Before printing |
|---|---|
| 2026 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2025 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2024 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
The bike image is an illustrative design preview. Exported artwork needs sizing and cut-line review before production; printing and vinyl are supplied by your print shop.
Stark Varg EX Graphics Kit Panels
The design sheet organizes artwork by panel, with matching left and right pieces to review with your printer. Check the artwork placement on the bike preview before exporting your design.
- 1Main side panelsthe main body covers, radiator shrouds or battery-side surfaces, depending on the model
- 2Upper body coverssmaller bodywork areas near the seat; check the fitted covers on your exact bike
- 3Front fenderlong and curved, read from above and from the front
- 4Front number platethe plate on the forks, where your number or headlight surround goes
- 5Fork guardsnarrow pieces that pick up color from the main kit
- 6Swingarm decalslong strips that protect the swingarm and carry a name or a small logo
- 7Seat coverprinted or plain, and a good spot for a brand or a stripe
- 8Rear fenderlong and tapered, the last thing riders behind you see
Varg EX Design Guide
Three short guides written for the Varg EX: how to plan the kit, where numbers go, and how to match it to your riding.
Designing a Varg EX graphics kit, step by step
The Varg EX shares the smooth, battery-centered body of the MX, but adds a headlight front plate, so start your design there. Decide whether the area around the light stays dark and simple or picks up a bright accent from the shrouds. Then design the shrouds and battery-side panels, which form one long smooth surface, perfect for a graphic that runs from front to back. Mirror the right side to the left; with no exhaust, both sides can look identical. The dark grey stock base makes neon accents pop, while a forest or camo base blends in on trails. Set the Frame and Wheels colors to match your bike, then flip the preview to check the headlight and both sides from a distance.
Race numbers and sponsor logos on the Varg EX
Enduro and trail events require numbers on the headlight plate and side panels of the Varg EX. Space around the headlight is limited, so size digits to fit cleanly and keep them off the lens. Plate colors depend on the series; many off-road events assign them by class, and some have separate electric classes, so check your rules. The smooth side panels have plenty of room for large, bold numbers with a contrasting outline. Main sponsors fit on the upper shrouds, and the rear fender works for a name or club logo. A clean, modern font suits the electric look and stays readable through dust. Varg EX graphics with clear numbers help officials, while bold accents keep the bike looking modern.
Making the most of the Varg EX's electric look
The Varg EX is quiet on the trail, so riders often want it to look as modern as it sounds. Long, flowing designs suit the smooth body: circuit lines, gradients or a single neon stripe that runs from the headlight to the tail. For trail durability, place busier textures on the lower shrouds and battery-side panels, where boots and rocks hit, and keep bright accents higher up. Riders who share trails with hikers sometimes prefer muted forest tones with one neon detail, which keeps the bike low-key until you look closely. Matte finishes hide trail scratches, while gloss accents add shine. Chrome or holographic logos look great on an electric bike in small doses. A well-designed Varg EX graphics kit combines a futuristic look with trail-ready durability.
Varg EX Color Ideas
Three palettes shown on the bike. Apply one in the editor and keep designing from there.
Electric trail
Dark base with neon.
Pink electric
Pink camo tones.
Forest
Blends in, with a neon hint.
How to Install Stark Varg EX Graphics
You need a heat gun or hair dryer, a squeegee and isopropyl alcohol. Plan an hour or two for a full Varg EX kit.
- 01Take the plastics offRemove the shrouds, fenders and plates from the Varg EX and work on a clean bench. Loose panels are far easier to wrap than panels on the bike.
- 02Strip the old decalsWarm old graphics with a heat gun or hair dryer and peel them slowly at a low angle. Remove leftover adhesive with an adhesive remover.
- 03Clean and degreaseWash the plastics, then wipe them with isopropyl alcohol so no oil or silicone is left. Let them dry completely.
- 04Line up each graphicPeel back only the first few centimeters of backing, line the graphic up against the panel's edges and holes, and tack it down.
- 05Lay it from the middle outPull the backing off as you go and push the vinyl down from the center outward with a squeegee or your thumb, chasing air toward the edges.
- 06Heat the curves and edgesWarm the vinyl around tight curves and edges so it stretches and settles, then press the edges down firmly. Keep the bike unplugged and cool while you apply graphics, and give the adhesive a day to cure before charging and riding.
Cost of a Custom Stark Varg EX Graphics Kit
Designing a Varg EX kit costs nothing. You only spend credits on AI designs and on the clean HD export you send to the printer. Printing is paid to the shop you choose.
Styles That Suit the Varg EX
Stark Varg EX Graphics Kit FAQ
01Which bikes does this Stark Varg EX graphics kit fit?
This is an artwork preview for the Stark Varg EX. Model years 2024–2026 are design references, not certified template compatibility. Have your printer confirm the exact year, installed plastics and cut lines. The Varg MX has its own page and kit.
02Will this kit fit an older Varg EX?
The model-year guide lists references for 2024–2026. Do not infer fit for an older bike from the preview. Check its installed plastics and a matching printer template before production.
03Is the Varg EX kit the same as the Varg MX kit?
They share the body, but the EX has a lit front plate and trail parts. Design on the Varg EX for the right fit.
04Can I design a kids' or youth-style kit?
Yes. Pink camo, galaxy and bright splatter kits are popular for younger riders.
05Are Varg EX graphics the same as Varg EX decals or a wrap?
Riders use all three words for the same thing: printed, die-cut vinyl that covers the Varg EX's plastics. A "kit" means the full set of panels designed to work together.
06Can I see the Varg EX kit on the bike before I pay?
Yes. Designing and previewing are free. The 2D preview includes a front angle and a mirrored view; models with a 3D viewer can also be rotated in the designer.
07Can I add my race number and name to the Varg EX?
Yes. Type it in the Text panel and place it on the plates in one click. Numbers read the right way on both sides of the bike, and you can add a name across the rear fender or the shrouds.
08Can I put my own logo or artwork on the kit?
Yes. Upload a sponsor logo, team badge or photo, place it on any panel, then scale, rotate and recolor it.
09Can I leave some panels plain?
Yes. Paint any panel a solid color, or clear the artwork from it. Plain plastics next to a busy shroud graphic often look the most professional.
10What do I get with the HD export?
Clean high-resolution preview images and a flat artwork sheet without a watermark. The Varg EX export costs 30 credits; confirm physical dimensions and cut lines with your printer before printing.
11Is this a Varg EX graphics kit I design myself?
Yes. You design it here, export the HD sheet, and have it printed and cut by the print shop of your choice. That keeps you in control of the design, the vinyl and the price.
12Can I share my Varg EX design?
Yes. Create a share card or a link, and anyone can open the design and see it on the bike.
13How much does an AI design cost?
10 credits from a text prompt, or 20 credits from a photo. Credits come in one-time packs, from 200 credits for $9.90.
14Do credits expire?
No. Credits are a one-time purchase with no subscription, and they never expire.
More Stark graphics
Other Stark models you can design kits for — same brand family, separate fitment.
Popular styles for the Varg EX
Related guides
A practical workflow for designing a full graphics kit: picking a base, building contrast, placing numbers and logos, and checking both sides.
Washing, storage and riding habits that keep a graphics kit looking new for more seasons.
Contrast, size and font tips so your number is readable at speed.
Prep, heat and squeegee technique for a clean graphics install on motocross plastics.
Explore more
Related bikes
Start your Varg EX kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing