Talaria Sting Graphics Kit
Try a design on the Sting, then make it yours with AI, your logos and your race number.
Talaria Sting Graphics Designs
6 kits to start from on the Sting. Pick one above to preview it, then recolor it, add your number or make it your own Sting graphics.
Talaria Dirt Bike Graphics
The Talaria Sting is a mid-size electric dirt bike and a popular rival to the Sur-Ron Light Bee. Like other e-bikes it has no exhaust, so the battery-side panels give a clean, flat area on each side.
A Talaria Sting graphics kit can use those side panels for one bold design or a big name. E-bike plastics differ between models and years, so confirm your panels before ordering.
- Battery-side panels
- The main canvas. Flat and wide for big artwork.
- Front shrouds
- Good for designs that sweep back toward the seat.
- Front fender
- A quick spot to repeat the main color.
- Rear fender
- Room for a name or small logo.
2D previewDesign Your Own Sting Graphics in the Editor
The editor shows the flat Sting kit sheet next to a live view of the bike. Place a design, paint single panels, type your number or drop in a logo, and the bike updates as you work.
- Flip between the left and right side
- Mirror artwork across
- Gloss, matte, chrome or holographic
Neon green lightning on a midnight base
2D previewCustom Sting Graphics with AI
Describe the kit you want or upload a reference photo, and the AI lays out a full, mirrored Sting kit. Every AI design stays editable. Have your print shop check the final dimensions and cut lines.
- 10 credits from text
- 20 credits from a photo
- Mirrored on both sides
Sting Graphics Fitment Guide
Choose your model year below. These are design reference years, not a promise that one cut template fits every year. Match your installed plastics to a model-specific template with your printer.
| Year | Before printing |
|---|---|
| 2026 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2025 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2024 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2023 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2022 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
The bike image is an illustrative design preview. Exported artwork needs sizing and cut-line review before production; printing and vinyl are supplied by your print shop.
Talaria Sting Graphics Kit Panels
The design sheet organizes artwork by panel, with matching left and right pieces to review with your printer. Check the artwork placement on the bike preview before exporting your design.
- 1Main side panelsthe main body covers, radiator shrouds or battery-side surfaces, depending on the model
- 2Upper body coverssmaller bodywork areas near the seat; check the fitted covers on your exact bike
- 3Front fenderlong and curved, read from above and from the front
- 4Front number platethe plate on the forks, where your number or headlight surround goes
- 5Fork guardsnarrow pieces that pick up color from the main kit
- 6Swingarm decalslong strips that protect the swingarm and carry a name or a small logo
- 7Seat coverprinted or plain, and a good spot for a brand or a stripe
- 8Rear fenderlong and tapered, the last thing riders behind you see
Sting Design Guide
Three short guides written for the Sting: how to plan the kit, where numbers go, and how to match it to your riding.
Designing a Talaria Sting graphics kit, step by step
Many Sting owners want their bike to stand apart from the Sur-Ron crowd, so start by choosing a color scheme you rarely see on other e-bikes, like teal, purple or a warm sunset gradient. The stock dark gray, with light gray frame and rim hints in the preview, supports almost any choice. Begin with the front shrouds, which sweep back toward the seat, and let their line continue onto the battery-side panels so the bike reads as one shape. Then add the fenders. Mid-size bodywork rewards designs that are bold without being crowded, so leave some breathing room. Mirror both sides and check each one in the preview. Because panels vary by model year and aftermarket bodywork is common, confirm the preview matches your bike.
Race numbers and sponsor logos on the Talaria Sting
If you take your Sting to electric races or pit bike events, check the rules for plate colors and where numbers must go. Otherwise, you have full freedom: a number can be purely stylistic, or you can replace it with your name or a tag. On the battery-side panels, keep numbers on the flattest area and give them a solid background box so they read against busy artwork. A modern, slightly italic font suits the Sting's sweeping shrouds, as long as the digits stay thick. Sponsor logos fit best on the front shrouds and rear fender. On the dark stock base, light or neon logos stand out; on a bright custom base, switch to black. Keep the logo count low on a mid-size bike.
Making the most of the Talaria Sting's electric look
The Sting's appeal is that it feels modern, and the kit can lean into that. Electric themes like lightning, honeycomb or digital camo work naturally, but a clean two-tone design with a sharp diagonal split can look just as futuristic. Riders who use the bike on trails often prefer muted colors that hide dust and scrapes, while riders who meet up with friends tend to go loud so the bike stands out in a group. Talaria Sting graphics pair well with colored rims, levers or a seat cover in your accent color. A matte laminate gives a premium, low-glare finish that suits e-bikes. Remember that panels vary by year and aftermarket bodywork is common, so confirm your exact setup before ordering.
Sting Color Ideas
Three palettes shown on the bike. Apply one in the editor and keep designing from there.
Stealth
Dark gray with light accents.
Sting neon
Black with neon and cyan.
Galaxy
Deep blue and purple tones.
How to Install Talaria Sting Graphics
You need a heat gun or hair dryer, a squeegee and isopropyl alcohol. Plan an hour or two for a full Sting kit.
- 01Take the plastics offRemove the shrouds, fenders and plates from the Sting and work on a clean bench. Loose panels are far easier to wrap than panels on the bike.
- 02Strip the old decalsWarm old graphics with a heat gun or hair dryer and peel them slowly at a low angle. Remove leftover adhesive with an adhesive remover.
- 03Clean and degreaseWash the plastics, then wipe them with isopropyl alcohol so no oil or silicone is left. Let them dry completely.
- 04Line up each graphicPeel back only the first few centimeters of backing, line the graphic up against the panel's edges and holes, and tack it down.
- 05Lay it from the middle outPull the backing off as you go and push the vinyl down from the center outward with a squeegee or your thumb, chasing air toward the edges.
- 06Heat the curves and edgesWarm the vinyl around tight curves and edges so it stretches and settles, then press the edges down firmly. Keep the bike unplugged and cool while you work. Clean the panels with alcohol, dry fit, then apply from the center out. Let the adhesive cure for a day before washing.
Cost of a Custom Talaria Sting Graphics Kit
Designing a Sting kit costs nothing. You only spend credits on AI designs and on the clean HD export you send to the printer. Printing is paid to the shop you choose.
Styles That Suit the Sting
Talaria Sting Graphics Kit FAQ
01Which bikes does this Talaria Sting graphics kit fit?
This is an artwork preview for the Talaria Sting. Model years 2022–2026 are design references, not certified template compatibility. Have your printer confirm the exact year, installed plastics and cut lines. The XXX and Komodo have their own page and kit.
02Will this kit fit an older Sting?
The model-year guide lists references for 2022–2026. Do not infer fit for an older bike from the preview. Check its installed plastics and a matching printer template before production.
03Do Talaria Sting decals fit the XXX or a Sur-Ron?
No. E-bike plastics differ between models and years. Confirm your panels and design on the exact bike you ride.
04Do graphics work on aftermarket Sting plastics?
Often, but shapes vary. If your plastics aren't stock, check the panel shape with your printer first.
05Are Sting graphics the same as Sting decals or a wrap?
Riders use all three words for the same thing: printed, die-cut vinyl that covers the Sting's plastics. A "kit" means the full set of panels designed to work together.
06Can I see the Sting kit on the bike before I pay?
Yes. Designing and previewing are free. The 2D preview includes a front angle and a mirrored view; models with a 3D viewer can also be rotated in the designer.
07Can I add my race number and name to the Sting?
Yes. Type it in the Text panel and place it on the plates in one click. Numbers read the right way on both sides of the bike, and you can add a name across the rear fender or the shrouds.
08Can I put my own logo or artwork on the kit?
Yes. Upload a sponsor logo, team badge or photo, place it on any panel, then scale, rotate and recolor it.
09Can I leave some panels plain?
Yes. Paint any panel a solid color, or clear the artwork from it. Plain plastics next to a busy shroud graphic often look the most professional.
10What do I get with the HD export?
Clean high-resolution preview images and a flat artwork sheet without a watermark. The Sting export costs 30 credits; confirm physical dimensions and cut lines with your printer before printing.
11Is this a Sting graphics kit I design myself?
Yes. You design it here, export the HD sheet, and have it printed and cut by the print shop of your choice. That keeps you in control of the design, the vinyl and the price.
12Can I share my Sting design?
Yes. Create a share card or a link, and anyone can open the design and see it on the bike.
13How much does an AI design cost?
10 credits from a text prompt, or 20 credits from a photo. Credits come in one-time packs, from 200 credits for $9.90.
14Do credits expire?
No. Credits are a one-time purchase with no subscription, and they never expire.
More Talaria graphics
Other Talaria models you can design kits for — same brand family, separate fitment.
Popular styles for the Sting
Related guides
A practical workflow for designing a full graphics kit: picking a base, building contrast, placing numbers and logos, and checking both sides.
Washing, storage and riding habits that keep a graphics kit looking new for more seasons.
Contrast, size and font tips so your number is readable at speed.
Prep, heat and squeegee technique for a clean graphics install on motocross plastics.
Explore more
Related bikes
Start your Sting kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing