Kids · design references 2027

KTM SX-E 2 Graphics Kit

Try a design on the SX-E 2, then make it yours with AI, your logos and your race number.

2027 KTM SX-E 2 dirt bike graphics kit preview

2D previewModel year

Try a design

Customize this SX-E 2 kit Create with AI

1 model year8 artwork areasFree to design4K artwork export

KTM SX-E 2 Graphics Designs

6 kits to start from on the SX-E 2. Pick one above to preview it, then recolor it, add your number or make it your own SX-E 2 graphics.

Battery-side covers Front number area Rear side panels

KTM dirt bike graphics

KTM Dirt Bike Graphics

The SX-E 2 is KTM's compact electric mini motocrosser, with a small battery and motor instead of a petrol engine or exhaust.

Use a strong battery-cover symbol and short rider lettering; leave the motor and battery service areas visually clear.

Battery-side covers: Use a strong battery-cover symbol and short rider lettering; leave the motor and battery service areas visually clear.
Front number area: Keep the main number on a solid contrasting field; inspect its size on the SX-E 2 preview before adding smaller lettering.
Rear side panels: Place a short name or number on one continuous SX-E 2 panel. Keep letters away from fasteners, panel gaps and the seat edge.

All KTM graphics

KTM SX-E 2Designer

Graphics kits

KTM SX-E 2 American flag graphics print sheet

2D preview

Editor

Design Your Own SX-E 2 Graphics in the Editor

The editor shows the flat SX-E 2 kit sheet next to a live view of the bike. Place a design, paint single panels, type your number or drop in a logo, and the bike updates as you work.

Flip between the left and right side
Mirror artwork across
Gloss, matte, chrome or holographic

Open the SX-E 2 in the editor

KTM SX-E 2Designer

AI designer

Neon green lightning on a midnight base

KTM SX-E 2 lightning graphics print sheet

2D preview

AI designer

Custom SX-E 2 Graphics with AI

Describe the kit you want or upload a reference photo, and the AI lays out a full, mirrored SX-E 2 kit. Every AI design stays editable. Have your print shop check the final dimensions and cut lines.

Prompt“Retro graphics in ktm accent colors with a white number plate”

10 credits from text
20 credits from a photo
Mirrored on both sides

Try the AI on the SX-E 2

KTM SX-E 2 white plastics dirt bike graphics design illustration

Model years & template checks

SX-E 2 Graphics Fitment Guide

Reviewed image years: 2027. Choose a year in the bike preview to see its own manufacturer-photo-based illustration.

Choose your model year below. These are design reference years, not a promise that one cut template fits every year. Match your installed plastics to a model-specific template with your printer.

SX-E 2 model-year template checks
Year	Before printing
2027	Match the installed plastics, bolt holes and panel edges to your printer's template for this model year.View the 2027 bike preview

The bike image is an illustrative design preview. Exported artwork needs sizing and cut-line review before production; printing and vinyl are supplied by your print shop.

Manufacturer references

2027 KTM SX-E 2 - BRIDGE CIRCUIT | KTM United States

Kit panels

KTM SX-E 2 Graphics Kit Panels

The design sheet organizes artwork by panel, with matching left and right pieces to review with your printer. Check the artwork placement on the bike preview before exporting your design.

1Main side panelsthe main body covers, radiator shrouds or battery-side surfaces, depending on the model
2Upper body coverssmaller bodywork areas near the seat; check the fitted covers on your exact bike
3Front fenderlong and curved, read from above and from the front
4Front number platethe plate on the forks, where your number or headlight surround goes
5Fork guardsnarrow pieces that pick up color from the main kit
6Swingarm decalslong strips that protect the swingarm and carry a name or a small logo
7Seat coverprinted or plain, and a good spot for a brand or a stripe
8Rear fenderlong and tapered, the last thing riders behind you see

SX-E 2 Design Guide

Three short guides written for the SX-E 2: how to plan the kit, where numbers go, and how to match it to your riding.

Design guide

SX-E 2: model identity before artwork

The SX-E 2 is KTM's compact electric mini motocrosser, with a small battery and motor instead of a petrol engine or exhaust. Start the artwork on this model's preview rather than substituting a similarly named KTM. Model identity and catalogue reference, not decal-template compatibility.

Numbers & logos

Planning the SX-E 2 panel layout

Use a strong battery-cover symbol and short rider lettering; leave the motor and battery service areas visually clear. Build the main motif first, then inspect the preview and its mirrored view with a simple rider number. The white 2D base is an illustration for evaluating colour and composition; the opposing view is mirrored and is not a separate engineering reference.

Ride it

SX-E 2 catalogue reference and print handoff

2027 is the catalogue reference used for this illustration, not a verified range of interchangeable plastics. Confirm the exact production year, fitted bodywork and a matching cut template with your printer. Send the printer your exact model identity, photographs of the fitted plastics and exported artwork for sizing and cut-line review. Editing is free; AI generation and clean exports use credits, and physical printing is a separate service.

SX-E 2 Color Ideas

Three palettes shown on the bike. Apply one in the editor and keep designing from there.

KTM accent

A KTM-inspired palette around the white SX-E 2 design preview. The illustration is not a stock-colour specification.

White and charcoal

Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.

Bright mini

Keep the SX-E 2 lettering short and the small panel shapes bold.

Install

How to Install KTM SX-E 2 Graphics

You need a heat gun or hair dryer, a squeegee and isopropyl alcohol. Plan an hour or two for a full SX-E 2 kit.

01
Take the plastics offRemove the shrouds, fenders and plates from the SX-E 2 and work on a clean bench. Loose panels are far easier to wrap than panels on the bike.
02
Strip the old decalsWarm old graphics with a heat gun or hair dryer and peel them slowly at a low angle. Remove leftover adhesive with an adhesive remover.
03
Clean and degreaseWash the plastics, then wipe them with isopropyl alcohol so no oil or silicone is left. Let them dry completely.
04
Line up each graphicPeel back only the first few centimeters of backing, line the graphic up against the panel's edges and holes, and tack it down.
05
Lay it from the middle outPull the backing off as you go and push the vinyl down from the center outward with a squeegee or your thumb, chasing air toward the edges.
06
Heat the curves and edgesWarm the vinyl around tight curves and edges so it stretches and settles, then press the edges down firmly. For the SX-E 2, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the battery and motor, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.

Read the full install guide

Export your SX-E 2 kit ×

KTM SX-E 2 dirt bike graphics kit free preview

Free previewWatermarked · 1280px

HD artwork sheet4K · no watermark

Unlock HD · 30 credits

Cost

Cost of a Custom KTM SX-E 2 Graphics Kit

Designing a SX-E 2 kit costs nothing. You only spend credits on AI designs and on the clean HD export you send to the printer. Printing is paid to the shop you choose.

Design, preview and watermarked exportFree

AI design from a text prompt10 credits

AI design from a photo20 credits

HD export of the SX-E 2 kit30 credits

Starter credit pack$9.90 · 200 credits

Pro credit pack$19.90 · 550 credits

Max credit pack$39.90 · 1,200 credits

Ultra credit pack$69.90 · 2,500 credits

What custom graphics cost to print

Styles That Suit the SX-E 2

Retro dirt bike graphics

Checkered graphics kits

Browse paint splatter styles

flame dirt bike graphics

gradient dirt bike graphics Woodland camo dirt bike graphics Tiger stripe graphics kits Browse carbon fiber styles galaxy dirt bike graphics Wave dirt bike graphics

KTM SX-E 2 Graphics Kit FAQ

Which bikes does this KTM SX-E 2 graphics kit fit?

This is an artwork preview for the KTM SX-E 2. Model years 2027 are design references, not certified template compatibility. Have your printer confirm the exact year, installed plastics and cut lines. The 65 SX and 85 SX have their own page and kit.

Does the SX-E 2 kit fit the 65 SX and 85 SX?

Bikes in the same KTM family often have similar plastics, but shapes can differ around the shrouds, side panels and plates. Use the kit made for your exact bike, and check with your printer before using one kit for two bikes.

What distinguishes the SX-E 2 in this catalogue?

The SX-E 2 is KTM's compact electric mini motocrosser, with a small battery and motor instead of a petrol engine or exhaust.

What should I check before printing SX-E 2 graphics?

Which layout works well on the SX-E 2?

Use a strong battery-cover symbol and short rider lettering; leave the motor and battery service areas visually clear.

Is the SX-E 2 preview a factory parts or fitment drawing?

No. It is an independent white-background 2D artwork illustration. The manufacturer catalogue confirms the model identity; it does not certify our generated image, dimensions or decal cut lines.

Are SX-E 2 graphics the same as SX-E 2 decals or a wrap?

Riders use all three words for the same thing: printed, die-cut vinyl that covers the SX-E 2's plastics. A "kit" means the full set of panels designed to work together.

Can I see the SX-E 2 kit on the bike before I pay?

Yes. Designing and previewing are free. The 2D preview includes a front angle and a mirrored view; models with a 3D viewer can also be rotated in the designer.

Can I add my child's name and number to the SX-E 2?

Yes. Type it in the Text panel and place it on the plates in one click. Numbers read the right way on both sides of the bike, and you can add a name across the rear fender or the shrouds.

Can I put my own logo or artwork on the kit?

Yes. Upload a sponsor logo, team badge or photo, place it on any panel, then scale, rotate and recolor it.

Can I leave some panels plain?

Yes. Paint any panel a solid color, or clear the artwork from it. Plain plastics next to a busy shroud graphic often look the most professional.

What do I get with the HD export?

Clean high-resolution preview images and a flat artwork sheet without a watermark. The SX-E 2 export costs 30 credits; confirm physical dimensions and cut lines with your printer before printing.

Is this a SX-E 2 graphics kit I design myself?

Yes. You design it here, export the HD sheet, and have it printed and cut by the print shop of your choice. That keeps you in control of the design, the vinyl and the price.