KTM 50 SX Graphics Kit
Try a design on the 50 SX, then make it yours with AI, your logos and your race number.
KTM 50 SX Graphics Designs
6 kits to start from on the 50 SX. Pick one above to preview it, then recolor it, add your number or make it your own 50 SX graphics.
KTM Dirt Bike Graphics
The 50 SX is KTM's mini motocrosser for young kids, styled to look like the full-size SX bikes. It uses an automatic clutch, so new riders can focus on throttle and balance.
Kids love a bike that looks like the ones the pros ride. A 50 SX graphics kit with a factory-style design, bright colors and their name makes a small bike feel like a real race machine.
- Radiator shrouds
- The main canvas. Keep shapes bold so they read on small panels.
- Side panels
- Room for a name or a race number.
- Front plate
- Big, clear numbers or a name.
- Rear fender
- A small spot for a fun pattern.
2D previewDesign Your Own 50 SX Graphics in the Editor
The editor shows the flat 50 SX kit sheet next to a live view of the bike. Place a design, paint single panels, type your number or drop in a logo, and the bike updates as you work.
- Flip between the left and right side
- Mirror artwork across
- Gloss, matte, chrome or holographic
Neon green lightning on a midnight base
2D previewCustom 50 SX Graphics with AI
Describe the kit you want or upload a reference photo, and the AI lays out a full, mirrored 50 SX kit. Every AI design stays editable. Have your print shop check the final dimensions and cut lines.
- 10 credits from text
- 20 credits from a photo
- Mirrored on both sides
50 SX Graphics Fitment Guide
Reviewed image years: 2026, 2025, 2024. Choose a year in the bike preview to see its own manufacturer-photo-based illustration.
Choose your model year below. These are design reference years, not a promise that one cut template fits every year. Match your installed plastics to a model-specific template with your printer.
| Year | Before printing |
|---|---|
| 2026 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year.View the 2026 bike preview |
| 2025 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year.View the 2025 bike preview |
| 2024 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year.View the 2024 bike preview |
The bike image is an illustrative design preview. Exported artwork needs sizing and cut-line review before production; printing and vinyl are supplied by your print shop.
KTM 50 SX Graphics Kit Panels
The design sheet organizes artwork by panel, with matching left and right pieces to review with your printer. Check the artwork placement on the bike preview before exporting your design.
- 1Main side panelsthe main body covers, radiator shrouds or battery-side surfaces, depending on the model
- 2Upper body coverssmaller bodywork areas near the seat; check the fitted covers on your exact bike
- 3Front fenderlong and curved, read from above and from the front
- 4Front number platethe plate on the forks, where your number or headlight surround goes
- 5Fork guardsnarrow pieces that pick up color from the main kit
- 6Swingarm decalslong strips that protect the swingarm and carry a name or a small logo
- 7Seat coverprinted or plain, and a good spot for a brand or a stripe
- 8Rear fenderlong and tapered, the last thing riders behind you see
50 SX Design Guide
Three short guides written for the 50 SX: how to plan the kit, where numbers go, and how to match it to your riding.
Designing a KTM 50 SX graphics kit, step by step
The 50 SX starts from KTM orange, with dark frame and rim hints in the preview. Kids who want to look like the pros will usually ask for orange, black and white, but neon green, purple or bright blue also work well on such a small bike. Start with the radiator shrouds, which are the main canvas, and keep shapes bold and simple, because fine detail disappears at this scale. Then move to the side panels, front plate and rear fender. Mirror the layout so both sides match. Let your young racer pick the main color and pattern, then sit down together and check both sides in the preview before ordering. Zoom out as well, to see how the kit reads from the fence line.
Names, numbers and logos on the KTM 50 SX
Many 50 SX riders are just starting to race, so names and numbers often go hand in hand on this bike. Put the number on the front plate and side panels in a bold, easy-to-read font, and check your local series for plate color rules in the 50cc classes. The rider's name fits well high on the shrouds or along the rear fender. Keep it short, or use a nickname, so it stays big enough to read. Sponsor logos, often from a local shop or a family business, look best in a single color on the shrouds or front fender. Avoid crowding the small panels; a simple, factory-style layout looks more professional and lets the rider's number stand out at the gate.
Making a KTM 50 SX kit last (and grow with your rider)
Mini racers crash, tip over and get dragged around the pits, so durability matters as much as looks. Thick laminated vinyl and firmly pressed edges help the kit survive a full season. Busy patterns hide scratches between refreshes. Young riders progress fast, and many move up to a bigger bike within a few seasons, so plan for change: keep the number on plate decals that can be updated if it changes, and put the name somewhere easy to replace. Saving your design means you can reorder matching 50 SX graphics after a hard season, or carry the same colors and layout over to the next bike, so your rider keeps a signature look as they grow.
50 SX Color Ideas
Three palettes shown on the bike. Apply one in the editor and keep designing from there.
Mini factory
Just like the big SX bikes.
Neon kid
Bright and easy to spot on track.
Purple racer
A bold, colorful mix.
How to Install KTM 50 SX Graphics
You need a heat gun or hair dryer, a squeegee and isopropyl alcohol. Plan an hour or two for a full 50 SX kit.
- 01Take the plastics offRemove the shrouds, fenders and plates from the 50 SX and work on a clean bench. Loose panels are far easier to wrap than panels on the bike.
- 02Strip the old decalsWarm old graphics with a heat gun or hair dryer and peel them slowly at a low angle. Remove leftover adhesive with an adhesive remover.
- 03Clean and degreaseWash the plastics, then wipe them with isopropyl alcohol so no oil or silicone is left. Let them dry completely.
- 04Line up each graphicPeel back only the first few centimeters of backing, line the graphic up against the panel's edges and holes, and tack it down.
- 05Lay it from the middle outPull the backing off as you go and push the vinyl down from the center outward with a squeegee or your thumb, chasing air toward the edges.
- 06Heat the curves and edgesWarm the vinyl around tight curves and edges so it stretches and settles, then press the edges down firmly. The panels are small, so take your time with alignment. Press all edges down firmly: mini bikes get dropped often, and laminated vinyl holds up better to scrapes.
Cost of a Custom KTM 50 SX Graphics Kit
Designing a 50 SX kit costs nothing. You only spend credits on AI designs and on the clean HD export you send to the printer. Printing is paid to the shop you choose.
Styles That Suit the 50 SX
KTM 50 SX Graphics Kit FAQ
01Which bikes does this KTM 50 SX graphics kit fit?
This is an artwork preview for the KTM 50 SX. Model years 2024–2026 are design references, not certified template compatibility. Have your printer confirm the exact year, installed plastics and cut lines. The SX-E 5 and SX-E 3 have their own page and kit.
02Does the 50 SX kit fit the SX-E 5 and SX-E 3?
Bikes in the same KTM family often have similar plastics, but shapes can differ around the shrouds, side panels and plates. Use the kit made for your exact bike, and check with your printer before using one kit for two bikes.
03Name or race number on a 50 SX?
Both work. Many young riders run their name on the shrouds and a number on the front plate once they start racing.
04Will older 50 SX decals fit the current bike?
The current generation has updated bodywork, so choose 50 SX decals made for your year range.
05Are 50 SX graphics the same as 50 SX decals or a wrap?
Riders use all three words for the same thing: printed, die-cut vinyl that covers the 50 SX's plastics. A "kit" means the full set of panels designed to work together.
06Can I see the 50 SX kit on the bike before I pay?
Yes. Designing and previewing are free. The 2D preview includes a front angle and a mirrored view; models with a 3D viewer can also be rotated in the designer.
07Can I add my child's name and number to the 50 SX?
Yes. Type it in the Text panel and place it on the plates in one click. Numbers read the right way on both sides of the bike, and you can add a name across the rear fender or the shrouds.
08Can I put my own logo or artwork on the kit?
Yes. Upload a sponsor logo, team badge or photo, place it on any panel, then scale, rotate and recolor it.
09Can I leave some panels plain?
Yes. Paint any panel a solid color, or clear the artwork from it. Plain plastics next to a busy shroud graphic often look the most professional.
10What do I get with the HD export?
Clean high-resolution preview images and a flat artwork sheet without a watermark. The 50 SX export costs 30 credits; confirm physical dimensions and cut lines with your printer before printing.
11Is this a 50 SX graphics kit I design myself?
Yes. You design it here, export the HD sheet, and have it printed and cut by the print shop of your choice. That keeps you in control of the design, the vinyl and the price.
12Can I share my 50 SX design?
Yes. Create a share card or a link, and anyone can open the design and see it on the bike.
13How much does an AI design cost?
10 credits from a text prompt, or 20 credits from a photo. Credits come in one-time packs, from 200 credits for $9.90.
14Do credits expire?
No. Credits are a one-time purchase with no subscription, and they never expire.
More KTM graphics
Other KTM models you can design kits for — same brand family, separate fitment.
Popular styles for the 50 SX
Related guides
How each laminate looks, wears and cleans on a dirt bike.
A practical workflow for designing a full graphics kit: picking a base, building contrast, placing numbers and logos, and checking both sides.
Contrast, size and font tips so your number is readable at speed.
Prep, heat and squeegee technique for a clean graphics install on motocross plastics.
Explore more
Related bikes
Start your 50 SX kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing