KTM 300 SX Graphics Kit
Try a design on the 300 SX, then make it yours with AI, your logos and your race number.
KTM 300 SX Graphics Designs
6 kits to start from on the 300 SX. Pick one above to preview it, then recolor it, add your number or make it your own 300 SX graphics.
KTM Dirt Bike Graphics
The 300 SX is KTM's fuel-injected 300 two-stroke motocrosser, built on the current generation of SX plastics. It has the same long, flat side panels and angular shrouds as the rest of the SX range.
Big two-strokes have a cult following, and riders often give them a look with some attitude. A 300 SX graphics kit can go loud with flames and splatter, or dark and clean with orange pinstripes.
- Radiator shrouds
- The main canvas. Designs that flow front to back look best.
- Side panels
- Flat, broad areas for numbers and names.
- Front fender
- A spot to repeat the shroud pattern.
- Swingarm decals
- Thin strips that tie the bike together.
2D previewDesign Your Own 300 SX Graphics in the Editor
The editor shows the flat 300 SX kit sheet next to a live view of the bike. Place a design, paint single panels, type your number or drop in a logo, and the bike updates as you work.
- Flip between the left and right side
- Mirror artwork across
- Gloss, matte, chrome or holographic
Neon green lightning on a midnight base
2D previewCustom 300 SX Graphics with AI
Describe the kit you want or upload a reference photo, and the AI lays out a full, mirrored 300 SX kit. Every AI design stays editable. Have your print shop check the final dimensions and cut lines.
- 10 credits from text
- 20 credits from a photo
- Mirrored on both sides
300 SX Graphics Fitment Guide
Choose your model year below. These are design reference years, not a promise that one cut template fits every year. Match your installed plastics to a model-specific template with your printer.
| Year | Before printing |
|---|---|
| 2026 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2025 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2024 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2023 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
The bike image is an illustrative design preview. Exported artwork needs sizing and cut-line review before production; printing and vinyl are supplied by your print shop.
KTM 300 SX Graphics Kit Panels
The design sheet organizes artwork by panel, with matching left and right pieces to review with your printer. Check the artwork placement on the bike preview before exporting your design.
- 1Main side panelsthe main body covers, radiator shrouds or battery-side surfaces, depending on the model
- 2Upper body coverssmaller bodywork areas near the seat; check the fitted covers on your exact bike
- 3Front fenderlong and curved, read from above and from the front
- 4Front number platethe plate on the forks, where your number or headlight surround goes
- 5Fork guardsnarrow pieces that pick up color from the main kit
- 6Swingarm decalslong strips that protect the swingarm and carry a name or a small logo
- 7Seat coverprinted or plain, and a good spot for a brand or a stripe
- 8Rear fenderlong and tapered, the last thing riders behind you see
300 SX Design Guide
Three short guides written for the 300 SX: how to plan the kit, where numbers go, and how to match it to your riding.
Designing a KTM 300 SX graphics kit, step by step
The 300 SX is a big two-stroke with a cult following, and many owners want a kit that sets it apart from the far more common 125s and 250s in the pits. Start with the base: orange is classic, but stealth black, charcoal or olive camo suit the bike's character just as well. The preview shows dark frame and rim hints, so dark designs look sleek and orange designs look factory. Design the radiator shrouds first, then extend the lines along the side plates. On the right side, the expansion chamber runs close to the panel, so check that your artwork still reads well there and does not rely on detail low down. Mirror the layout where possible, and review both sides in the preview before ordering.
Race numbers and sponsor logos on the KTM 300 SX
The 300 SX often races in open or vet classes, and plate rules vary by series, so check yours before you lock in a background. If you have a free choice, a black plate with orange or white numbers looks sharp on this bike. Use a wide, heavy font with generous spacing between digits, because thin numbers fill in quickly once mud starts flying. On the side panels, place the number toward the front and keep it clear of the lower edge on the pipe side. Sponsor logos sit best on the upper shrouds and rear fender. Vet riders often have a handful of personal supporters, such as a local shop, a tuner or their own business, so a simple, uniform logo layout keeps the bike looking clean.
Matching the KTM 300 SX kit to how you ride
Many 300 SX owners are experienced riders who enjoy a strong, torquey two-stroke on the track and sometimes away from it. If you mostly race motocross, a clean, factory-style design with bold numbers works well and keeps the focus on your plates. If you also ride rocky trails or rough practice tracks, dark designs with camo or carbon-fiber textures hide scratches and roost marks far better than bright white. Riders who keep a bike for many seasons should invest in thicker laminated vinyl and a design they will not tire of after a few months. Because the 300 SX is less common at the track, a distinctive look makes it even more recognizable. Choose 300 SX graphics that match your personality, whether loud and bold or dark and understated.
300 SX Color Ideas
Three palettes shown on the bike. Apply one in the editor and keep designing from there.
Ready to race
Orange base with black and white.
Stealth orange
Black and gray with orange lines.
Camo two-stroke
Olive and black with an orange hint.
How to Install KTM 300 SX Graphics
You need a heat gun or hair dryer, a squeegee and isopropyl alcohol. Plan an hour or two for a full 300 SX kit.
- 01Take the plastics offRemove the shrouds, fenders and plates from the 300 SX and work on a clean bench. Loose panels are far easier to wrap than panels on the bike.
- 02Strip the old decalsWarm old graphics with a heat gun or hair dryer and peel them slowly at a low angle. Remove leftover adhesive with an adhesive remover.
- 03Clean and degreaseWash the plastics, then wipe them with isopropyl alcohol so no oil or silicone is left. Let them dry completely.
- 04Line up each graphicPeel back only the first few centimeters of backing, line the graphic up against the panel's edges and holes, and tack it down.
- 05Lay it from the middle outPull the backing off as you go and push the vinyl down from the center outward with a squeegee or your thumb, chasing air toward the edges.
- 06Heat the curves and edgesWarm the vinyl around tight curves and edges so it stretches and settles, then press the edges down firmly. Warm the shroud creases and press the vinyl in with your thumb. Make sure side panels are free of oil and residue before you start.
Cost of a Custom KTM 300 SX Graphics Kit
Designing a 300 SX kit costs nothing. You only spend credits on AI designs and on the clean HD export you send to the printer. Printing is paid to the shop you choose.
Styles That Suit the 300 SX
KTM 300 SX Graphics Kit FAQ
01Which bikes does this KTM 300 SX graphics kit fit?
This is an artwork preview for the KTM 300 SX. Model years 2023–2026 are design references, not certified template compatibility. Have your printer confirm the exact year, installed plastics and cut lines. The 450 SX-F, 250 SX-F, 125 SX and 250 SX have their own page and kit.
02Will this kit fit an older 300 SX?
The model-year guide lists references for 2023–2026. Do not infer fit for an older bike from the preview. Check its installed plastics and a matching printer template before production.
03Does a 300 SX kit fit the 125 SX or 250 SX?
KTM's two-stroke SX models are often similar within a generation. Check with your printer before ordering one kit for several bikes.
04Will 300 SX decals fit the 300 XC or EXC?
Off-road models can use different plastics, lights and side panels. Design on the exact model you ride.
05Are 300 SX graphics the same as 300 SX decals or a wrap?
Riders use all three words for the same thing: printed, die-cut vinyl that covers the 300 SX's plastics. A "kit" means the full set of panels designed to work together.
06Can I see the 300 SX kit on the bike before I pay?
Yes. Designing and previewing are free. The 2D preview includes a front angle and a mirrored view; models with a 3D viewer can also be rotated in the designer.
07Can I add my race number and name to the 300 SX?
Yes. Type it in the Text panel and place it on the plates in one click. Numbers read the right way on both sides of the bike, and you can add a name across the rear fender or the shrouds.
08Can I put my own logo or artwork on the kit?
Yes. Upload a sponsor logo, team badge or photo, place it on any panel, then scale, rotate and recolor it.
09Can I leave some panels plain?
Yes. Paint any panel a solid color, or clear the artwork from it. Plain plastics next to a busy shroud graphic often look the most professional.
10What do I get with the HD export?
Clean high-resolution preview images and a flat artwork sheet without a watermark. The 300 SX export costs 30 credits; confirm physical dimensions and cut lines with your printer before printing.
11Is this a 300 SX graphics kit I design myself?
Yes. You design it here, export the HD sheet, and have it printed and cut by the print shop of your choice. That keeps you in control of the design, the vinyl and the price.
12Can I share my 300 SX design?
Yes. Create a share card or a link, and anyone can open the design and see it on the bike.
13How much does an AI design cost?
10 credits from a text prompt, or 20 credits from a photo. Credits come in one-time packs, from 200 credits for $9.90.
14Do credits expire?
No. Credits are a one-time purchase with no subscription, and they never expire.
Related bikes
Start your 300 SX kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing