Kids · design references 2027

Yamaha TT-R50E Graphics Kit

Try a design on the TT-R50E, then make it yours with AI, your logos and your race number.

2027 Yamaha TT-R50E dirt bike graphics kit preview

2D previewModel year

Try a design

Customize this TT-R50E kit Create with AI

1 model year8 artwork areasFree to design4K artwork export

Yamaha TT-R50E Graphics Designs

6 kits to start from on the TT-R50E. Pick one above to preview it, then recolor it, add your number or make it your own TT-R50E graphics.

Tank-side covers / shrouds Front number area Rear side panels

Yamaha dirt bike graphics

Yamaha Dirt Bike Graphics

The TT-R50E is Yamaha's low-seat electric-start four-stroke mini trail bike, with a small horizontal engine and tiny wheels.

Use a single large icon on each cover and generous spacing around the rider name instead of a crowded race replica.

Tank-side covers / shrouds: Use a single large icon on each cover and generous spacing around the rider name instead of a crowded race replica.
Front number area: Keep the main number on a solid contrasting field; inspect its size on the TT-R50E preview before adding smaller lettering.
Rear side panels: Place a short name or number on one continuous TT-R50E panel. Keep letters away from fasteners, panel gaps and the seat edge.

All Yamaha graphics

Yamaha TT-R50EDesigner

Graphics kits

Yamaha TT-R50E American flag graphics print sheet

2D preview

Editor

Design Your Own TT-R50E Graphics in the Editor

The editor shows the flat TT-R50E kit sheet next to a live view of the bike. Place a design, paint single panels, type your number or drop in a logo, and the bike updates as you work.

Flip between the left and right side
Mirror artwork across
Gloss, matte, chrome or holographic

Open the TT-R50E in the editor

Yamaha TT-R50EDesigner

AI designer

Neon green lightning on a midnight base

Yamaha TT-R50E lightning graphics print sheet

2D preview

AI designer

Custom TT-R50E Graphics with AI

Describe the kit you want or upload a reference photo, and the AI lays out a full, mirrored TT-R50E kit. Every AI design stays editable. Have your print shop check the final dimensions and cut lines.

Prompt“Retro graphics in yamaha accent colors with a white number plate”

10 credits from text
20 credits from a photo
Mirrored on both sides

Try the AI on the TT-R50E

Yamaha TT-R50E white plastics dirt bike graphics design illustration

Model years & template checks

TT-R50E Graphics Fitment Guide

Reviewed image years: 2027. Choose a year in the bike preview to see its own manufacturer-photo-based illustration.

Choose your model year below. These are design reference years, not a promise that one cut template fits every year. Match your installed plastics to a model-specific template with your printer.

TT-R50E model-year template checks
Year	Before printing
2027	Match the installed plastics, bolt holes and panel edges to your printer's template for this model year.View the 2027 bike preview

The bike image is an illustrative design preview. Exported artwork needs sizing and cut-line review before production; printing and vinyl are supplied by your print shop.

Manufacturer references

2027 TT-R50E Yamaha Motorsports, USA

Kit panels

Yamaha TT-R50E Graphics Kit Panels

The design sheet organizes artwork by panel, with matching left and right pieces to review with your printer. Check the artwork placement on the bike preview before exporting your design.

1Main side panelsthe main body covers, radiator shrouds or battery-side surfaces, depending on the model
2Upper body coverssmaller bodywork areas near the seat; check the fitted covers on your exact bike
3Front fenderlong and curved, read from above and from the front
4Front number platethe plate on the forks, where your number or headlight surround goes
5Fork guardsnarrow pieces that pick up color from the main kit
6Swingarm decalslong strips that protect the swingarm and carry a name or a small logo
7Seat coverprinted or plain, and a good spot for a brand or a stripe
8Rear fenderlong and tapered, the last thing riders behind you see

TT-R50E Design Guide

Three short guides written for the TT-R50E: how to plan the kit, where numbers go, and how to match it to your riding.

Design guide

TT-R50E: model identity before artwork

The TT-R50E is Yamaha's low-seat electric-start four-stroke mini trail bike, with a small horizontal engine and tiny wheels. Start the artwork on this model's preview rather than substituting a similarly named Yamaha. Exact official model-year photograph and identity; not calibrated decal-template compatibility.

Numbers & logos

Planning the TT-R50E panel layout

Use a single large icon on each cover and generous spacing around the rider name instead of a crowded race replica. Build the main motif first, then inspect the preview and its mirrored view with a simple rider number. The white 2D base is an illustration for evaluating colour and composition; the opposing view is mirrored and is not a separate engineering reference.

Ride it

TT-R50E catalogue reference and print handoff

2027 is the catalogue reference used for this illustration, not a verified range of interchangeable plastics. Confirm the exact production year, fitted bodywork and a matching cut template with your printer. Send the printer your exact model identity, photographs of the fitted plastics and exported artwork for sizing and cut-line review. Editing is free; AI generation and clean exports use credits, and physical printing is a separate service.

TT-R50E Color Ideas

Three palettes shown on the bike. Apply one in the editor and keep designing from there.

Yamaha accent

A Yamaha-inspired palette around the white TT-R50E design preview. The illustration is not a stock-colour specification.

White and charcoal

Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.

Bright mini

Keep the TT-R50E lettering short and the small panel shapes bold.

Install

How to Install Yamaha TT-R50E Graphics

You need a heat gun or hair dryer, a squeegee and isopropyl alcohol. Plan an hour or two for a full TT-R50E kit.

01
Take the plastics offRemove the shrouds, fenders and plates from the TT-R50E and work on a clean bench. Loose panels are far easier to wrap than panels on the bike.
02
Strip the old decalsWarm old graphics with a heat gun or hair dryer and peel them slowly at a low angle. Remove leftover adhesive with an adhesive remover.
03
Clean and degreaseWash the plastics, then wipe them with isopropyl alcohol so no oil or silicone is left. Let them dry completely.
04
Line up each graphicPeel back only the first few centimeters of backing, line the graphic up against the panel's edges and holes, and tack it down.
05
Lay it from the middle outPull the backing off as you go and push the vinyl down from the center outward with a squeegee or your thumb, chasing air toward the edges.
06
Heat the curves and edgesWarm the vinyl around tight curves and edges so it stretches and settles, then press the edges down firmly. For the TT-R50E, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the four-stroke engine and exhaust header, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.

Read the full install guide

Export your TT-R50E kit ×

Yamaha TT-R50E dirt bike graphics kit free preview

Free previewWatermarked · 1280px

HD artwork sheet4K · no watermark

Unlock HD · 30 credits

Cost

Cost of a Custom Yamaha TT-R50E Graphics Kit

Designing a TT-R50E kit costs nothing. You only spend credits on AI designs and on the clean HD export you send to the printer. Printing is paid to the shop you choose.

Design, preview and watermarked exportFree

AI design from a text prompt10 credits

AI design from a photo20 credits

HD export of the TT-R50E kit30 credits

Starter credit pack$9.90 · 200 credits

Pro credit pack$19.90 · 550 credits

Max credit pack$39.90 · 1,200 credits

Ultra credit pack$69.90 · 2,500 credits

What custom graphics cost to print

Styles That Suit the TT-R50E

Retro dirt bike graphics

Checkered graphics kits

Browse paint splatter styles

flame dirt bike graphics

gradient dirt bike graphics Tiger stripe dirt bike graphics Woodland camo graphics kits Browse carbon fiber styles wave dirt bike graphics Galaxy dirt bike graphics

Yamaha TT-R50E Graphics Kit FAQ

Which bikes does this Yamaha TT-R50E graphics kit fit?

This is an artwork preview for the Yamaha TT-R50E. Model years 2027 are design references, not certified template compatibility. Have your printer confirm the exact year, installed plastics and cut lines. The YZ65, TT-R110E and TT-R125LE have their own page and kit.

Does the TT-R50E kit fit the YZ65, TT-R110E and TT-R125LE?

Bikes in the same Yamaha family often have similar plastics, but shapes can differ around the shrouds, side panels and plates. Use the kit made for your exact bike, and check with your printer before using one kit for two bikes.

What distinguishes the TT-R50E in this catalogue?

The TT-R50E is Yamaha's low-seat electric-start four-stroke mini trail bike, with a small horizontal engine and tiny wheels.

What should I check before printing TT-R50E graphics?

Which layout works well on the TT-R50E?

Use a single large icon on each cover and generous spacing around the rider name instead of a crowded race replica.

Is the TT-R50E preview a factory parts or fitment drawing?

No. It is an independent white-background 2D artwork illustration. The manufacturer catalogue confirms the model identity; it does not certify our generated image, dimensions or decal cut lines.

Are TT-R50E graphics the same as TT-R50E decals or a wrap?

Riders use all three words for the same thing: printed, die-cut vinyl that covers the TT-R50E's plastics. A "kit" means the full set of panels designed to work together.

Can I see the TT-R50E kit on the bike before I pay?

Yes. Designing and previewing are free. The 2D preview includes a front angle and a mirrored view; models with a 3D viewer can also be rotated in the designer.

Can I add my child's name and number to the TT-R50E?

Yes. Type it in the Text panel and place it on the plates in one click. Numbers read the right way on both sides of the bike, and you can add a name across the rear fender or the shrouds.

Can I put my own logo or artwork on the kit?

Yes. Upload a sponsor logo, team badge or photo, place it on any panel, then scale, rotate and recolor it.

Can I leave some panels plain?

Yes. Paint any panel a solid color, or clear the artwork from it. Plain plastics next to a busy shroud graphic often look the most professional.

What do I get with the HD export?

Clean high-resolution preview images and a flat artwork sheet without a watermark. The TT-R50E export costs 30 credits; confirm physical dimensions and cut lines with your printer before printing.

Is this a TT-R50E graphics kit I design myself?

Yes. You design it here, export the HD sheet, and have it printed and cut by the print shop of your choice. That keeps you in control of the design, the vinyl and the price.