Wave Rieju MR Pro 125 Graphics Kit
Layered wave graphics bring a surf-inspired flow to the plastics. This page puts the wave kit on the Rieju MR Pro 125. The MR Pro 125 uses the liquid-cooled Minarelli 125 four-stroke engine; it is not a small-bore two-stroke MR race model.
Open it in the designer to see wave dirt bike graphics mapped to the MR Pro 125's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How wave graphics fit the MR Pro 125
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
A narrow diagonal over the radiator cover and a short rear name strip suit the slim four-stroke learner-enduro body. Run the waves from the front of the bike backward so they look like they are breaking off the shrouds.
Headlight mask
Keep the MR Pro 125 lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous MR Pro 125 panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a wave MR Pro 125
Wave starter
The palette the wave kit opens with.
Rieju stock match
Keeps Rieju's stock color as the base so the kit looks factory-fresh.
Rieju accent
A Rieju-inspired palette around the white MR Pro 125 design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- White foam dots add depth without cluttering.
- Holographic finish makes the water shimmer.
- On the MR Pro 125, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the MR Pro 125
For the MR Pro 125, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the four-stroke engine and exhaust header, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the Rieju MR Pro 125
Start the designer on the Rieju MR Pro 125 with the wave kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More Rieju MR Pro 125 graphics styles
Wave graphics for other bikes
Wave Rieju MR Pro 125 graphics FAQ
01Do these wave graphics fit my Rieju MR Pro 125?
The kit is laid out on the Rieju MR Pro 125's panel shapes. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the wave kit on my MR Pro 125?
Yes. Recolor the whole design, or paint single parts. Many Rieju riders keep Rieju's stock color as the base and use the pattern as an accent.
03Where should the race number go on a MR Pro 125?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design wave dirt bike graphics for the Rieju MR Pro 125?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the MR Pro 125 in this catalogue?
The MR Pro 125 uses the liquid-cooled Minarelli 125 four-stroke engine; it is not a small-bore two-stroke MR race model.
Design your wave MR Pro 125 kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing