Wave Rieju MR 300i Graphics Kit
Layered wave graphics bring a surf-inspired flow to the plastics. This page puts the wave kit on the Rieju MR 300i. The MR 300i is Rieju's injected 300 two-stroke enduro family. Racing, Pro and Hard Enduro equipment trims are grouped here.
Open it in the designer to see wave dirt bike graphics mapped to the MR 300i's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How wave graphics fit the MR 300i
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
Use one strong upper-shroud motif above the pipe and reserve a clear unprinted border around the headlight lens. Run the waves from the front of the bike backward so they look like they are breaking off the shrouds.
Headlight mask
Keep the MR 300i lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous MR 300i panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a wave MR 300i
Wave starter
The palette the wave kit opens with.
Rieju stock match
Keeps Rieju's stock color as the base so the kit looks factory-fresh.
Rieju accent
A Rieju-inspired palette around the white MR 300i design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- White foam dots add depth without cluttering.
- Holographic finish makes the water shimmer.
- On the MR 300i, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the MR 300i
For the MR 300i, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the two-stroke engine and expansion chamber, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the Rieju MR 300i
Start the designer on the Rieju MR 300i with the wave kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More Rieju MR 300i graphics styles
Wave graphics for other bikes
Wave Rieju MR 300i graphics FAQ
01Do these wave graphics fit my Rieju MR 300i?
The kit is laid out on the Rieju MR 300i's panel shapes for the 2027–2027 reference years. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the wave kit on my MR 300i?
Yes. Recolor the whole design, or paint single parts. Many Rieju riders keep Rieju's stock color as the base and use the pattern as an accent.
03Where should the race number go on a MR 300i?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design wave dirt bike graphics for the Rieju MR 300i?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the MR 300i in this catalogue?
The MR 300i is Rieju's injected 300 two-stroke enduro family. Racing, Pro and Hard Enduro equipment trims are grouped here.
Design your wave MR 300i kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing