Carbon Fiber Rieju MRT 50 Graphics Kit
A carbon weave print with thin accent lines gives a stealthy, factory look without the cost of real carbon parts. This page puts the carbon fiber kit on the Rieju MRT 50. The MRT 50 is Rieju's geared 50cc enduro, with tall knobby wheels and a headlight rather than automatic mini-motocross proportions.
Open it in the designer to see carbon fiber dirt bike graphics mapped to the MRT 50's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How carbon fiber graphics fit the MRT 50
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
Use slim colour bands that follow the tall, narrow covers, and keep the small side name area simple. Pair with black rims and a dark frame for a murdered-out build.
Headlight mask
Keep the MRT 50 lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous MRT 50 panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a carbon fiber MRT 50
Carbon fiber starter
The palette the carbon fiber kit opens with.
Rieju stock match
Keeps Rieju's stock color as the base so the kit looks factory-fresh.
Rieju accent
A Rieju-inspired palette around the white MRT 50 design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- One bright accent line is enough.
- Gloss finish makes the weave look like the real thing.
- On the MRT 50, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the MRT 50
For the MRT 50, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the two-stroke engine and expansion chamber, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the Rieju MRT 50
Start the designer on the Rieju MRT 50 with the carbon fiber kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More Rieju MRT 50 graphics styles
Carbon fiber graphics for other bikes
Carbon fiber Rieju MRT 50 graphics FAQ
01Do these carbon fiber graphics fit my Rieju MRT 50?
The kit is laid out on the Rieju MRT 50's panel shapes. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the carbon fiber kit on my MRT 50?
Yes. Recolor the whole design, or paint single parts. Many Rieju riders keep Rieju's stock color as the base and use the pattern as an accent.
03Where should the race number go on a MRT 50?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design carbon fiber dirt bike graphics for the Rieju MRT 50?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the MRT 50 in this catalogue?
The MRT 50 is Rieju's geared 50cc enduro, with tall knobby wheels and a headlight rather than automatic mini-motocross proportions.
Design your carbon fiber MRT 50 kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing