Enduro / off-road · manufacturer catalogue reference

Rieju MRT 50 Graphics Kit

Try a design on the MRT 50, then make it yours with AI, your logos and your race number.

Rieju MRT 50 dirt bike graphics kit preview

2D preview

Try a design

Customize this MRT 50 kit Create with AI

Listed in catalogue8 artwork areasFree to design4K artwork export

Rieju MRT 50 Graphics Designs

6 kits to start from on the MRT 50. Pick one above to preview it, then recolor it, add your number or make it your own MRT 50 graphics.

Tank-side covers / shrouds Headlight mask Rear side panels

Rieju dirt bike graphics

Rieju Dirt Bike Graphics

The MRT 50 is Rieju's geared 50cc enduro, with tall knobby wheels and a headlight rather than automatic mini-motocross proportions.

Use slim colour bands that follow the tall, narrow covers, and keep the small side name area simple.

Tank-side covers / shrouds: Use slim colour bands that follow the tall, narrow covers, and keep the small side name area simple.
Headlight mask: Keep the MRT 50 lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels: Place a short name or number on one continuous MRT 50 panel. Keep letters away from fasteners, panel gaps and the seat edge.

All Rieju graphics

Rieju MRT 50Designer

Graphics kits

Rieju MRT 50 American flag graphics print sheet

2D preview

Editor

Design Your Own MRT 50 Graphics in the Editor

The editor shows the flat MRT 50 kit sheet next to a live view of the bike. Place a design, paint single panels, type your number or drop in a logo, and the bike updates as you work.

Flip between the left and right side
Mirror artwork across
Gloss, matte, chrome or holographic

Open the MRT 50 in the editor

Rieju MRT 50Designer

AI designer

Neon green lightning on a midnight base

Rieju MRT 50 lightning graphics print sheet

2D preview

AI designer

Custom MRT 50 Graphics with AI

Describe the kit you want or upload a reference photo, and the AI lays out a full, mirrored MRT 50 kit. Every AI design stays editable. Have your print shop check the final dimensions and cut lines.

Prompt“Woodland camo graphics in rieju accent colors with a white number plate”

10 credits from text
20 credits from a photo
Mirrored on both sides

Try the AI on the MRT 50

Rieju MRT 50 white plastics dirt bike graphics design illustration

Model years & template checks

MRT 50 Graphics Fitment Guide

The manufacturer catalogue identifies this model, but no verified model-year range is listed here. Confirm the year on your bike before choosing a cut template. Match your installed plastics to a model-specific template with your printer.

The bike image is an illustrative design preview. Exported artwork needs sizing and cut-line review before production; printing and vinyl are supplied by your print shop.

Manufacturer references

Rieju manufacturer model catalogue

Kit panels

Rieju MRT 50 Graphics Kit Panels

The design sheet organizes artwork by panel, with matching left and right pieces to review with your printer. Check the artwork placement on the bike preview before exporting your design.

1Main side panelsthe main body covers, radiator shrouds or battery-side surfaces, depending on the model
2Upper body coverssmaller bodywork areas near the seat; check the fitted covers on your exact bike
3Front fenderlong and curved, read from above and from the front
4Front number platethe plate on the forks, where your number or headlight surround goes
5Fork guardsnarrow pieces that pick up color from the main kit
6Swingarm decalslong strips that protect the swingarm and carry a name or a small logo
7Seat coverprinted or plain, and a good spot for a brand or a stripe
8Rear fenderlong and tapered, the last thing riders behind you see

MRT 50 Design Guide

Three short guides written for the MRT 50: how to plan the kit, where numbers go, and how to match it to your riding.

Design guide

MRT 50: model identity before artwork

The MRT 50 is Rieju's geared 50cc enduro, with tall knobby wheels and a headlight rather than automatic mini-motocross proportions. Start the artwork on this model's preview rather than substituting a similarly named Rieju. Model identity and catalogue reference, not decal-template compatibility.

Numbers & logos

Planning the MRT 50 panel layout

Use slim colour bands that follow the tall, narrow covers, and keep the small side name area simple. Build the main motif first, then inspect the preview and its mirrored view with a simple rider number. The white 2D base is an illustration for evaluating colour and composition; the opposing view is mirrored and is not a separate engineering reference.

Ride it

MRT 50 catalogue reference and print handoff

The linked manufacturer catalogue identifies this model without a verified model-year range here. Check the VIN/model year and the installed plastics with your printer; do not treat the current listing date as a model year. Send the printer your exact model identity, photographs of the fitted plastics and exported artwork for sizing and cut-line review. Editing is free; AI generation and clean exports use credits, and physical printing is a separate service.

MRT 50 Color Ideas

Three palettes shown on the bike. Apply one in the editor and keep designing from there.

Rieju accent

A Rieju-inspired palette around the white MRT 50 design preview. The illustration is not a stock-colour specification.

White and charcoal

Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.

Trail contrast

A low-detail background keeps the MRT 50 silhouette and rider identity legible.

Install

How to Install Rieju MRT 50 Graphics

You need a heat gun or hair dryer, a squeegee and isopropyl alcohol. Plan an hour or two for a full MRT 50 kit.

01
Take the plastics offRemove the shrouds, fenders and plates from the MRT 50 and work on a clean bench. Loose panels are far easier to wrap than panels on the bike.
02
Strip the old decalsWarm old graphics with a heat gun or hair dryer and peel them slowly at a low angle. Remove leftover adhesive with an adhesive remover.
03
Clean and degreaseWash the plastics, then wipe them with isopropyl alcohol so no oil or silicone is left. Let them dry completely.
04
Line up each graphicPeel back only the first few centimeters of backing, line the graphic up against the panel's edges and holes, and tack it down.
05
Lay it from the middle outPull the backing off as you go and push the vinyl down from the center outward with a squeegee or your thumb, chasing air toward the edges.
06
Heat the curves and edgesWarm the vinyl around tight curves and edges so it stretches and settles, then press the edges down firmly. For the MRT 50, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the two-stroke engine and expansion chamber, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.

Read the full install guide

Export your MRT 50 kit ×

Rieju MRT 50 dirt bike graphics kit free preview

Free previewWatermarked · 1280px

HD artwork sheet4K · no watermark

Unlock HD · 30 credits

Cost

Cost of a Custom Rieju MRT 50 Graphics Kit

Designing a MRT 50 kit costs nothing. You only spend credits on AI designs and on the clean HD export you send to the printer. Printing is paid to the shop you choose.

Design, preview and watermarked exportFree

AI design from a text prompt10 credits

AI design from a photo20 credits

HD export of the MRT 50 kit30 credits

Starter credit pack$9.90 · 200 credits

Pro credit pack$19.90 · 550 credits

Max credit pack$39.90 · 1,200 credits

Ultra credit pack$69.90 · 2,500 credits

What custom graphics cost to print

Styles That Suit the MRT 50

Woodland camo dirt bike graphics

Digital camo graphics kits

Browse tiger stripe styles

carbon fiber dirt bike graphics

paint splatter dirt bike graphics Lightning dirt bike graphics Honeycomb graphics kits Browse american flag styles wave dirt bike graphics Pink camo dirt bike graphics

Rieju MRT 50 Graphics Kit FAQ

Which bikes does this Rieju MRT 50 graphics kit fit?

This is an artwork preview for the Rieju MRT 50. The manufacturer catalogue identifies this model without a verified model-year range here. Have your printer confirm the exact year, installed plastics and cut lines. The MR 300i, MR Pro 125 and Marathon 125 have their own page and kit.

Does the MRT 50 kit fit the MR 300i, MR Pro 125 and Marathon 125?

Bikes in the same Rieju family often have similar plastics, but shapes can differ around the shrouds, side panels and plates. Use the kit made for your exact bike, and check with your printer before using one kit for two bikes.

What distinguishes the MRT 50 in this catalogue?

The MRT 50 is Rieju's geared 50cc enduro, with tall knobby wheels and a headlight rather than automatic mini-motocross proportions.

What should I check before printing MRT 50 graphics?

Which layout works well on the MRT 50?

Use slim colour bands that follow the tall, narrow covers, and keep the small side name area simple.

Is the MRT 50 preview a factory parts or fitment drawing?

No. It is an independent white-background 2D artwork illustration. The manufacturer catalogue confirms the model identity; it does not certify our generated image, dimensions or decal cut lines.

Are MRT 50 graphics the same as MRT 50 decals or a wrap?

Riders use all three words for the same thing: printed, die-cut vinyl that covers the MRT 50's plastics. A "kit" means the full set of panels designed to work together.

Can I see the MRT 50 kit on the bike before I pay?

Yes. Designing and previewing are free. The 2D preview includes a front angle and a mirrored view; models with a 3D viewer can also be rotated in the designer.

Can I add my race number and name to the MRT 50?

Yes. Type it in the Text panel and place it on the plates in one click. Numbers read the right way on both sides of the bike, and you can add a name across the rear fender or the shrouds.

Can I put my own logo or artwork on the kit?

Yes. Upload a sponsor logo, team badge or photo, place it on any panel, then scale, rotate and recolor it.

Can I leave some panels plain?

Yes. Paint any panel a solid color, or clear the artwork from it. Plain plastics next to a busy shroud graphic often look the most professional.

What do I get with the HD export?

Clean high-resolution preview images and a flat artwork sheet without a watermark. The MRT 50 export costs 30 credits; confirm physical dimensions and cut lines with your printer before printing.

Is this a MRT 50 graphics kit I design myself?

Yes. You design it here, export the HD sheet, and have it printed and cut by the print shop of your choice. That keeps you in control of the design, the vinyl and the price.