Enduro / off-road · manufacturer catalogue reference

Kayo K4 Graphics Kit

Try a design on the K4, then make it yours with AI, your logos and your race number.

2D preview

Try a design

Listed in catalogue8 artwork areasFree to design4K artwork export

Kayo K4 Graphics Designs

6 kits to start from on the K4. Pick one above to preview it, then recolor it, add your number or make it your own K4 graphics.

Tank-side covers / shrouds Front number area Rear side panels

Kayo dirt bike graphics

Kayo Dirt Bike Graphics

Kayo lists the K4 with an air-cooled 249.9cc four-stroke and 21/18-inch off-road wheels in its global catalogue.

Use a two-zone shroud graphic and leave the exposed air-cooled engine visually separate from the body panels.

Tank-side covers / shrouds: Use a two-zone shroud graphic and leave the exposed air-cooled engine visually separate from the body panels.
Front number area: Keep the main number on a solid contrasting field; inspect its size on the K4 preview before adding smaller lettering.
Rear side panels: Place a short name or number on one continuous K4 panel. Keep letters away from fasteners, panel gaps and the seat edge.

All Kayo graphics

Kayo K4Designer

Graphics kits

Kayo K4 American flag graphics print sheet

2D preview

Editor

Design Your Own K4 Graphics in the Editor

The editor shows the flat K4 kit sheet next to a live view of the bike. Place a design, paint single panels, type your number or drop in a logo, and the bike updates as you work.

Flip between the left and right side
Mirror artwork across
Gloss, matte, chrome or holographic

Open the K4 in the editor

Kayo K4Designer

AI designer

Neon green lightning on a midnight base

2D preview

AI designer

Custom K4 Graphics with AI

Describe the kit you want or upload a reference photo, and the AI lays out a full, mirrored K4 kit. Every AI design stays editable. Have your print shop check the final dimensions and cut lines.

Prompt“Woodland camo graphics in kayo accent colors with a white number plate”

10 credits from text
20 credits from a photo
Mirrored on both sides

Try the AI on the K4

Kayo K4 white plastics dirt bike graphics design illustration

Model years & template checks

K4 Graphics Fitment Guide

The manufacturer catalogue identifies this model, but no verified model-year range is listed here. Confirm the year on your bike before choosing a cut template. Match your installed plastics to a model-specific template with your printer.

The bike image is an illustrative design preview. Exported artwork needs sizing and cut-line review before production; printing and vinyl are supplied by your print shop.

Manufacturer references

Kayo manufacturer model catalogue

Kit panels

Kayo K4 Graphics Kit Panels

The design sheet organizes artwork by panel, with matching left and right pieces to review with your printer. Check the artwork placement on the bike preview before exporting your design.

1Main side panelsthe main body covers, radiator shrouds or battery-side surfaces, depending on the model
2Upper body coverssmaller bodywork areas near the seat; check the fitted covers on your exact bike
3Front fenderlong and curved, read from above and from the front
4Front number platethe plate on the forks, where your number or headlight surround goes
5Fork guardsnarrow pieces that pick up color from the main kit
6Swingarm decalslong strips that protect the swingarm and carry a name or a small logo
7Seat coverprinted or plain, and a good spot for a brand or a stripe
8Rear fenderlong and tapered, the last thing riders behind you see

K4 Design Guide

Three short guides written for the K4: how to plan the kit, where numbers go, and how to match it to your riding.

Design guide

K4: model identity before artwork

Kayo lists the K4 with an air-cooled 249.9cc four-stroke and 21/18-inch off-road wheels in its global catalogue. Start the artwork on this model's preview rather than substituting a similarly named Kayo. Model identity and catalogue reference, not decal-template compatibility.

Numbers & logos

Planning the K4 panel layout

Use a two-zone shroud graphic and leave the exposed air-cooled engine visually separate from the body panels. Build the main motif first, then inspect the preview and its mirrored view with a simple rider number. The white 2D base is an illustration for evaluating colour and composition; the opposing view is mirrored and is not a separate engineering reference.

Ride it

K4 catalogue reference and print handoff

The linked manufacturer catalogue identifies this model without a verified model-year range here. Check the VIN/model year and the installed plastics with your printer; do not treat the current listing date as a model year. Send the printer your exact model identity, photographs of the fitted plastics and exported artwork for sizing and cut-line review. Editing is free; AI generation and clean exports use credits, and physical printing is a separate service.

K4 Color Ideas

Three palettes shown on the bike. Apply one in the editor and keep designing from there.

Kayo accent

A Kayo-inspired palette around the white K4 design preview. The illustration is not a stock-colour specification.

White and charcoal

Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.

Trail contrast

A low-detail background keeps the K4 silhouette and rider identity legible.

Install

How to Install Kayo K4 Graphics

You need a heat gun or hair dryer, a squeegee and isopropyl alcohol. Plan an hour or two for a full K4 kit.

01
Take the plastics offRemove the shrouds, fenders and plates from the K4 and work on a clean bench. Loose panels are far easier to wrap than panels on the bike.
02
Strip the old decalsWarm old graphics with a heat gun or hair dryer and peel them slowly at a low angle. Remove leftover adhesive with an adhesive remover.
03
Clean and degreaseWash the plastics, then wipe them with isopropyl alcohol so no oil or silicone is left. Let them dry completely.
04
Line up each graphicPeel back only the first few centimeters of backing, line the graphic up against the panel's edges and holes, and tack it down.
05
Lay it from the middle outPull the backing off as you go and push the vinyl down from the center outward with a squeegee or your thumb, chasing air toward the edges.
06
Heat the curves and edgesWarm the vinyl around tight curves and edges so it stretches and settles, then press the edges down firmly. For the K4, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the four-stroke engine and exhaust header, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.

Read the full install guide

Export your K4 kit ×

Kayo K4 dirt bike graphics kit free preview

Free previewWatermarked · 1280px

HD artwork sheet4K · no watermark

Unlock HD · 30 credits

Cost

Cost of a Custom Kayo K4 Graphics Kit

Designing a K4 kit costs nothing. You only spend credits on AI designs and on the clean HD export you send to the printer. Printing is paid to the shop you choose.

Design, preview and watermarked exportFree

AI design from a text prompt10 credits

AI design from a photo20 credits

HD export of the K4 kit30 credits

Starter credit pack$9.90 · 200 credits

Pro credit pack$19.90 · 550 credits

Max credit pack$39.90 · 1,200 credits

Ultra credit pack$69.90 · 2,500 credits

What custom graphics cost to print

Styles That Suit the K4

Woodland camo dirt bike graphics

Digital camo graphics kits

Browse tiger stripe styles

carbon fiber dirt bike graphics

flame dirt bike graphics Retro dirt bike graphics Gradient fade graphics kits Browse checkered styles galaxy dirt bike graphics Tribal dirt bike graphics

Kayo K4 Graphics Kit FAQ

Which bikes does this Kayo K4 graphics kit fit?

This is an artwork preview for the Kayo K4. The manufacturer catalogue identifies this model without a verified model-year range here. Have your printer confirm the exact year, installed plastics and cut lines. The K2, K5 and K6 have their own page and kit.

Does the K4 kit fit the K2, K5 and K6?

Bikes in the same Kayo family often have similar plastics, but shapes can differ around the shrouds, side panels and plates. Use the kit made for your exact bike, and check with your printer before using one kit for two bikes.

What distinguishes the K4 in this catalogue?

Kayo lists the K4 with an air-cooled 249.9cc four-stroke and 21/18-inch off-road wheels in its global catalogue.

What should I check before printing K4 graphics?

Which layout works well on the K4?

Use a two-zone shroud graphic and leave the exposed air-cooled engine visually separate from the body panels.

Is the K4 preview a factory parts or fitment drawing?

No. It is an independent white-background 2D artwork illustration. The manufacturer catalogue confirms the model identity; it does not certify our generated image, dimensions or decal cut lines.

Are K4 graphics the same as K4 decals or a wrap?

Riders use all three words for the same thing: printed, die-cut vinyl that covers the K4's plastics. A "kit" means the full set of panels designed to work together.

Can I see the K4 kit on the bike before I pay?

Yes. Designing and previewing are free. The 2D preview includes a front angle and a mirrored view; models with a 3D viewer can also be rotated in the designer.

Can I add my race number and name to the K4?

Yes. Type it in the Text panel and place it on the plates in one click. Numbers read the right way on both sides of the bike, and you can add a name across the rear fender or the shrouds.

Can I put my own logo or artwork on the kit?

Yes. Upload a sponsor logo, team badge or photo, place it on any panel, then scale, rotate and recolor it.

Can I leave some panels plain?

Yes. Paint any panel a solid color, or clear the artwork from it. Plain plastics next to a busy shroud graphic often look the most professional.

What do I get with the HD export?

Clean high-resolution preview images and a flat artwork sheet without a watermark. The K4 export costs 30 credits; confirm physical dimensions and cut lines with your printer before printing.

Is this a K4 graphics kit I design myself?

Yes. You design it here, export the HD sheet, and have it printed and cut by the print shop of your choice. That keeps you in control of the design, the vinyl and the price.