Kids · design references 2027

GasGas MC 65 Graphics Kit

Try a design on the MC 65, then make it yours with AI, your logos and your race number.

2027 GasGas MC 65 dirt bike graphics kit preview

2D previewModel year

Try a design

1 model year8 artwork areasFree to design4K artwork export

GasGas MC 65 Graphics Designs

6 kits to start from on the MC 65. Pick one above to preview it, then recolor it, add your number or make it your own MC 65 graphics.

Tank-side covers / shrouds Front number area Rear side panels

GasGas dirt bike graphics

GasGas Dirt Bike Graphics

The MC 65 is GASGAS's geared small-wheel youth two-stroke, between the MC 50 and MC 85.

A white number island surrounded by two bold colour blocks suits the compact shroud and side-plate area.

Tank-side covers / shrouds: A white number island surrounded by two bold colour blocks suits the compact shroud and side-plate area.
Front number area: Keep the main number on a solid contrasting field; inspect its size on the MC 65 preview before adding smaller lettering.
Rear side panels: Place a short name or number on one continuous MC 65 panel. Keep letters away from fasteners, panel gaps and the seat edge.

All GasGas graphics

GasGas MC 65Designer

Graphics kits

GasGas MC 65 American flag graphics print sheet

2D preview

Editor

Design Your Own MC 65 Graphics in the Editor

The editor shows the flat MC 65 kit sheet next to a live view of the bike. Place a design, paint single panels, type your number or drop in a logo, and the bike updates as you work.

Flip between the left and right side
Mirror artwork across
Gloss, matte, chrome or holographic

Open the MC 65 in the editor

GasGas MC 65Designer

AI designer

Neon green lightning on a midnight base

GasGas MC 65 lightning graphics print sheet

2D preview

AI designer

Custom MC 65 Graphics with AI

Describe the kit you want or upload a reference photo, and the AI lays out a full, mirrored MC 65 kit. Every AI design stays editable. Have your print shop check the final dimensions and cut lines.

Prompt“Retro graphics in gasgas accent colors with a white number plate”

10 credits from text
20 credits from a photo
Mirrored on both sides

Try the AI on the MC 65

GasGas MC 65 white plastics dirt bike graphics design illustration

Model years & template checks

MC 65 Graphics Fitment Guide

Reviewed image years: 2027. Choose a year in the bike preview to see its own manufacturer-photo-based illustration.

Choose your model year below. These are design reference years, not a promise that one cut template fits every year. Match your installed plastics to a model-specific template with your printer.

MC 65 model-year template checks
Year	Before printing
2027	Match the installed plastics, bolt holes and panel edges to your printer's template for this model year.View the 2027 bike preview

The bike image is an illustrative design preview. Exported artwork needs sizing and cut-line review before production; printing and vinyl are supplied by your print shop.

Manufacturer references

MC 65 2027 - Hold on tight! | GASGAS

Kit panels

GasGas MC 65 Graphics Kit Panels

The design sheet organizes artwork by panel, with matching left and right pieces to review with your printer. Check the artwork placement on the bike preview before exporting your design.

1Main side panelsthe main body covers, radiator shrouds or battery-side surfaces, depending on the model
2Upper body coverssmaller bodywork areas near the seat; check the fitted covers on your exact bike
3Front fenderlong and curved, read from above and from the front
4Front number platethe plate on the forks, where your number or headlight surround goes
5Fork guardsnarrow pieces that pick up color from the main kit
6Swingarm decalslong strips that protect the swingarm and carry a name or a small logo
7Seat coverprinted or plain, and a good spot for a brand or a stripe
8Rear fenderlong and tapered, the last thing riders behind you see

MC 65 Design Guide

Three short guides written for the MC 65: how to plan the kit, where numbers go, and how to match it to your riding.

Design guide

MC 65: model identity before artwork

The MC 65 is GASGAS's geared small-wheel youth two-stroke, between the MC 50 and MC 85. Start the artwork on this model's preview rather than substituting a similarly named GasGas. Exact official model-year photograph and identity; not calibrated decal-template compatibility.

Numbers & logos

Planning the MC 65 panel layout

A white number island surrounded by two bold colour blocks suits the compact shroud and side-plate area. Build the main motif first, then inspect the preview and its mirrored view with a simple rider number. The white 2D base is an illustration for evaluating colour and composition; the opposing view is mirrored and is not a separate engineering reference.

Ride it

MC 65 catalogue reference and print handoff

2027 is the catalogue reference used for this illustration, not a verified range of interchangeable plastics. Confirm the exact production year, fitted bodywork and a matching cut template with your printer. Send the printer your exact model identity, photographs of the fitted plastics and exported artwork for sizing and cut-line review. Editing is free; AI generation and clean exports use credits, and physical printing is a separate service.

MC 65 Color Ideas

Three palettes shown on the bike. Apply one in the editor and keep designing from there.

GasGas accent

A GasGas-inspired palette around the white MC 65 design preview. The illustration is not a stock-colour specification.

White and charcoal

Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.

Bright mini

Keep the MC 65 lettering short and the small panel shapes bold.

Install

How to Install GasGas MC 65 Graphics

You need a heat gun or hair dryer, a squeegee and isopropyl alcohol. Plan an hour or two for a full MC 65 kit.

01
Take the plastics offRemove the shrouds, fenders and plates from the MC 65 and work on a clean bench. Loose panels are far easier to wrap than panels on the bike.
02
Strip the old decalsWarm old graphics with a heat gun or hair dryer and peel them slowly at a low angle. Remove leftover adhesive with an adhesive remover.
03
Clean and degreaseWash the plastics, then wipe them with isopropyl alcohol so no oil or silicone is left. Let them dry completely.
04
Line up each graphicPeel back only the first few centimeters of backing, line the graphic up against the panel's edges and holes, and tack it down.
05
Lay it from the middle outPull the backing off as you go and push the vinyl down from the center outward with a squeegee or your thumb, chasing air toward the edges.
06
Heat the curves and edgesWarm the vinyl around tight curves and edges so it stretches and settles, then press the edges down firmly. For the MC 65, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the two-stroke engine and expansion chamber, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.

Read the full install guide

Export your MC 65 kit ×

GasGas MC 65 dirt bike graphics kit free preview

Free previewWatermarked · 1280px

HD artwork sheet4K · no watermark

Unlock HD · 30 credits

Cost

Cost of a Custom GasGas MC 65 Graphics Kit

Designing a MC 65 kit costs nothing. You only spend credits on AI designs and on the clean HD export you send to the printer. Printing is paid to the shop you choose.

Design, preview and watermarked exportFree

AI design from a text prompt10 credits

AI design from a photo20 credits

HD export of the MC 65 kit30 credits

Starter credit pack$9.90 · 200 credits

Pro credit pack$19.90 · 550 credits

Max credit pack$39.90 · 1,200 credits

Ultra credit pack$69.90 · 2,500 credits

What custom graphics cost to print

Styles That Suit the MC 65

Retro dirt bike graphics

Checkered graphics kits

Browse paint splatter styles

flame dirt bike graphics

wave dirt bike graphics Galaxy dirt bike graphics Carbon fiber graphics kits Browse tiger stripe styles camo dirt bike graphics Gradient fade dirt bike graphics

GasGas MC 65 Graphics Kit FAQ

Which bikes does this GasGas MC 65 graphics kit fit?

This is an artwork preview for the GasGas MC 65. Model years 2027 are design references, not certified template compatibility. Have your printer confirm the exact year, installed plastics and cut lines. The MC 50 and MC 85 have their own page and kit.

Does the MC 65 kit fit the MC 50 and MC 85?

Bikes in the same GasGas family often have similar plastics, but shapes can differ around the shrouds, side panels and plates. Use the kit made for your exact bike, and check with your printer before using one kit for two bikes.

What distinguishes the MC 65 in this catalogue?

The MC 65 is GASGAS's geared small-wheel youth two-stroke, between the MC 50 and MC 85.

What should I check before printing MC 65 graphics?

Which layout works well on the MC 65?

A white number island surrounded by two bold colour blocks suits the compact shroud and side-plate area.

Is the MC 65 preview a factory parts or fitment drawing?

No. It is an independent white-background 2D artwork illustration. The manufacturer catalogue confirms the model identity; it does not certify our generated image, dimensions or decal cut lines.

Are MC 65 graphics the same as MC 65 decals or a wrap?

Riders use all three words for the same thing: printed, die-cut vinyl that covers the MC 65's plastics. A "kit" means the full set of panels designed to work together.

Can I see the MC 65 kit on the bike before I pay?

Yes. Designing and previewing are free. The 2D preview includes a front angle and a mirrored view; models with a 3D viewer can also be rotated in the designer.

Can I add my child's name and number to the MC 65?

Yes. Type it in the Text panel and place it on the plates in one click. Numbers read the right way on both sides of the bike, and you can add a name across the rear fender or the shrouds.

Can I put my own logo or artwork on the kit?

Yes. Upload a sponsor logo, team badge or photo, place it on any panel, then scale, rotate and recolor it.

Can I leave some panels plain?

Yes. Paint any panel a solid color, or clear the artwork from it. Plain plastics next to a busy shroud graphic often look the most professional.

What do I get with the HD export?

Clean high-resolution preview images and a flat artwork sheet without a watermark. The MC 65 export costs 30 credits; confirm physical dimensions and cut lines with your printer before printing.

Is this a MC 65 graphics kit I design myself?

Yes. You design it here, export the HD sheet, and have it printed and cut by the print shop of your choice. That keeps you in control of the design, the vinyl and the price.