Beta 450 RX Graphics Kit
Try a design on the 450 RX, then make it yours with AI, your logos and your race number.
Beta 450 RX Graphics Designs
6 kits to start from on the 450 RX. Pick one above to preview it, then recolor it, add your number or make it your own 450 RX graphics.
Beta Dirt Bike Graphics
The 450 RX is Beta's motocross-focused 450, from an Italian brand better known for its enduro and trials bikes. It brings Beta's red-and-white styling to the track.
Beta's bodywork is sculpted, with a narrow tail section. Designs that follow the lines of the shrouds, rather than fighting them, look best on this bike.
- Radiator shrouds
- Sculpted shapes. Follow the lines with stripes.
- Rear fender
- Narrow, so keep text compact.
- Front plate
- Red or white plates both suit the brand.
- Swingarm
- A thin accent decal finishes the look.
2D previewDesign Your Own 450 RX Graphics in the Editor
The editor shows the flat 450 RX kit sheet next to a live view of the bike. Place a design, paint single panels, type your number or drop in a logo, and the bike updates as you work.
- Flip between the left and right side
- Mirror artwork across
- Gloss, matte, chrome or holographic
Neon green lightning on a midnight base
2D previewCustom 450 RX Graphics with AI
Describe the kit you want or upload a reference photo, and the AI lays out a full, mirrored 450 RX kit. Every AI design stays editable. Have your print shop check the final dimensions and cut lines.
- 10 credits from text
- 20 credits from a photo
- Mirrored on both sides
450 RX Graphics Fitment Guide
Choose your model year below. These are design reference years, not a promise that one cut template fits every year. Match your installed plastics to a model-specific template with your printer.
| Year | Before printing |
|---|---|
| 2026 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2025 | Match the installed plastics, bolt holes and panel edges to your printer's template for this model year. |
| 2024 | Beta introduced the MY2024 RX 450 with January 2024 availability. Match its installed plastics to your printer's template. |
The bike image is an illustrative design preview. Exported artwork needs sizing and cut-line review before production; printing and vinyl are supplied by your print shop.
Beta 450 RX Graphics Kit Panels
The design sheet organizes artwork by panel, with matching left and right pieces to review with your printer. Check the artwork placement on the bike preview before exporting your design.
- 1Main side panelsthe main body covers, radiator shrouds or battery-side surfaces, depending on the model
- 2Upper body coverssmaller bodywork areas near the seat; check the fitted covers on your exact bike
- 3Front fenderlong and curved, read from above and from the front
- 4Front number platethe plate on the forks, where your number or headlight surround goes
- 5Fork guardsnarrow pieces that pick up color from the main kit
- 6Swingarm decalslong strips that protect the swingarm and carry a name or a small logo
- 7Seat coverprinted or plain, and a good spot for a brand or a stripe
- 8Rear fenderlong and tapered, the last thing riders behind you see
450 RX Design Guide
Three short guides written for the 450 RX: how to plan the kit, where numbers go, and how to match it to your riding.
Designing a 450 RX graphics kit, step by step
Begin the 450 RX with Beta red if you want a factory feel, or switch to white or black for a more unusual look, which suits a bike that is rare at most tracks anyway. The shrouds are sculpted, with curves and creases that guide the eye, so trace their lines with stripes and color changes instead of placing a big flat logo across them. Design the right side first, then mirror it and check that the stripes still meet the panel edges cleanly. The narrow tail leaves a slim rear fender, so keep artwork compact there and let the shrouds do most of the talking. Set the Frame and Wheels colors to match your bike, and flip the preview between both sides to check the balance between the busy front and the slim rear.
Race numbers and sponsor logos on the 450 RX
The narrow tail of the 450 RX makes the side panels more compact than on some 450s, so pick a condensed, bold font that fits two digits without shrinking. Avoid stretching numbers sideways to fill the space; taller digits read better on this shape. A white background is common for the 450 class, and red or black digits suit the Beta look; if your series allows, a red plate with white digits feels like an Italian race bike. Place your main sponsor along the sculpted line of the upper shroud rather than squared off against it. The swingarm and fork guards work for smaller logos. Since the brand is less common, many riders add their name in large letters on the shrouds, which turns 450 RX graphics into a real conversation starter in the pits.
Matching the 450 RX kit to how you ride
Many riders come to the 450 RX from Beta's off-road bikes, and some still use it for trail loops between track days. If that sounds like you, give the lower shrouds and side panels a darker trim or a texture that hides scratches. On hard-pack tracks a bright gloss kit keeps the red vivid and easy to clean. In wet or sandy conditions the front fender and fork guards get the most roost, so darker colors there keep the bike looking fresher. A carbon-style pattern with a matte laminate gives a premium Italian feel and hides light wear. If you race, a tricolore accent of green, white and red repeated on every panel helps people spot you. Whatever you choose, plan 450 RX decals so the sculpted shrouds keep their shape visually.
450 RX Color Ideas
Three palettes shown on the bike. Apply one in the editor and keep designing from there.
Italian red
Stock-inspired.
Tricolore
A nod to Beta's Italian roots.
Carbon red
Dark and premium.
How to Install Beta 450 RX Graphics
You need a heat gun or hair dryer, a squeegee and isopropyl alcohol. Plan an hour or two for a full 450 RX kit.
- 01Take the plastics offRemove the shrouds, fenders and plates from the 450 RX and work on a clean bench. Loose panels are far easier to wrap than panels on the bike.
- 02Strip the old decalsWarm old graphics with a heat gun or hair dryer and peel them slowly at a low angle. Remove leftover adhesive with an adhesive remover.
- 03Clean and degreaseWash the plastics, then wipe them with isopropyl alcohol so no oil or silicone is left. Let them dry completely.
- 04Line up each graphicPeel back only the first few centimeters of backing, line the graphic up against the panel's edges and holes, and tack it down.
- 05Lay it from the middle outPull the backing off as you go and push the vinyl down from the center outward with a squeegee or your thumb, chasing air toward the edges.
- 06Heat the curves and edgesWarm the vinyl around tight curves and edges so it stretches and settles, then press the edges down firmly. Beta's narrow rear fender flexes a lot. Apply it with the fender removed and laid on a curved surface so the vinyl bonds in the shape it will sit in.
Cost of a Custom Beta 450 RX Graphics Kit
Designing a 450 RX kit costs nothing. You only spend credits on AI designs and on the clean HD export you send to the printer. Printing is paid to the shop you choose.
Styles That Suit the 450 RX
Beta 450 RX Graphics Kit FAQ
01Which bikes does this Beta 450 RX graphics kit fit?
This is an artwork preview for the Beta 450 RX. Model years 2024–2026 are design references, not certified template compatibility. Have your printer confirm the exact year, installed plastics and cut lines.
02Will this kit fit an older 450 RX?
The model-year guide lists references for 2024–2026. Do not infer fit for an older bike from the preview. Check its installed plastics and a matching printer template before production.
03Is the 450 RX kit the same as Beta's enduro bikes?
No. The RX is Beta's motocross model, and the enduro bikes use different bodywork and lighting.
04Can I use Italian flag colors?
Yes. Pick the tricolore palette or paint panels green, white and red in the Paint panel.
05Are 450 RX graphics the same as 450 RX decals or a wrap?
Riders use all three words for the same thing: printed, die-cut vinyl that covers the 450 RX's plastics. A "kit" means the full set of panels designed to work together.
06Can I see the 450 RX kit on the bike before I pay?
Yes. Designing and previewing are free. The 2D preview includes a front angle and a mirrored view; models with a 3D viewer can also be rotated in the designer.
07Can I add my race number and name to the 450 RX?
Yes. Type it in the Text panel and place it on the plates in one click. Numbers read the right way on both sides of the bike, and you can add a name across the rear fender or the shrouds.
08Can I put my own logo or artwork on the kit?
Yes. Upload a sponsor logo, team badge or photo, place it on any panel, then scale, rotate and recolor it.
09Can I leave some panels plain?
Yes. Paint any panel a solid color, or clear the artwork from it. Plain plastics next to a busy shroud graphic often look the most professional.
10What do I get with the HD export?
Clean high-resolution preview images and a flat artwork sheet without a watermark. The 450 RX export costs 30 credits; confirm physical dimensions and cut lines with your printer before printing.
11Is this a 450 RX graphics kit I design myself?
Yes. You design it here, export the HD sheet, and have it printed and cut by the print shop of your choice. That keeps you in control of the design, the vinyl and the price.
12Can I share my 450 RX design?
Yes. Create a share card or a link, and anyone can open the design and see it on the bike.
13How much does an AI design cost?
10 credits from a text prompt, or 20 credits from a photo. Credits come in one-time packs, from 200 credits for $9.90.
14Do credits expire?
No. Credits are a one-time purchase with no subscription, and they never expire.
More Beta graphics
Other Beta models you can design kits for — same brand family, separate fitment.
Popular styles for the 450 RX
Related guides
Contrast, size and font tips so your number is readable at speed.
A practical workflow for designing a full graphics kit: picking a base, building contrast, placing numbers and logos, and checking both sides.
Prep, heat and squeegee technique for a clean graphics install on motocross plastics.
Washing, storage and riding habits that keep a graphics kit looking new for more seasons.
Explore more
Related bikes
Start your 450 RX kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing