Wave KTM 300 XC-W Graphics Kit
Layered wave graphics bring a surf-inspired flow to the plastics. This page puts the wave kit on the KTM 300 XC-W. The 300 XC-W is KTM's big two-stroke wide-ratio enduro. Factory and Hardenduro trim names are not extra entries here.
Open it in the designer to see wave dirt bike graphics mapped to the 300 XC-W's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How wave graphics fit the 300 XC-W
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
A low-density camo or two-tone shroud works around the exposed pipe; keep important text away from deep panel folds. Run the waves from the front of the bike backward so they look like they are breaking off the shrouds.
Headlight mask
Keep the 300 XC-W lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous 300 XC-W panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a wave 300 XC-W
Wave starter
The palette the wave kit opens with.
KTM stock match
Keeps KTM's stock color as the base so the kit looks factory-fresh.
KTM accent
A KTM-inspired palette around the white 300 XC-W design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- White foam dots add depth without cluttering.
- Holographic finish makes the water shimmer.
- On the 300 XC-W, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the 300 XC-W
For the 300 XC-W, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the two-stroke engine and expansion chamber, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the KTM 300 XC-W
Start the designer on the KTM 300 XC-W with the wave kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More KTM 300 XC-W graphics styles
Wave graphics for other bikes
Wave KTM 300 XC-W graphics FAQ
01Do these wave graphics fit my KTM 300 XC-W?
The kit is laid out on the KTM 300 XC-W's panel shapes for the 2027–2027 reference years. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the wave kit on my 300 XC-W?
Yes. Recolor the whole design, or paint single parts. Many KTM riders keep KTM's stock color as the base and use the pattern as an accent.
03Where should the race number go on a 300 XC-W?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design wave dirt bike graphics for the KTM 300 XC-W?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the 300 XC-W in this catalogue?
The 300 XC-W is KTM's big two-stroke wide-ratio enduro. Factory and Hardenduro trim names are not extra entries here.
Design your wave 300 XC-W kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing