Wave Husqvarna TE 300 Graphics Kit
Layered wave graphics bring a surf-inspired flow to the plastics. This page puts the wave kit on the Husqvarna TE 300. The TE 300 is Husqvarna's big two-stroke enduro. Pro and Heritage trim names are grouped with the base model.
Open it in the designer to see wave dirt bike graphics mapped to the TE 300's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How wave graphics fit the TE 300
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
Use an open upper-shroud composition so the expansion chamber and enduro hardware remain distinct beneath it. Run the waves from the front of the bike backward so they look like they are breaking off the shrouds.
Headlight mask
Keep the TE 300 lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous TE 300 panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a wave TE 300
Wave starter
The palette the wave kit opens with.
Husqvarna stock match
Keeps Husqvarna's stock color as the base so the kit looks factory-fresh.
Husqvarna accent
A Husqvarna-inspired palette around the white TE 300 design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- White foam dots add depth without cluttering.
- Holographic finish makes the water shimmer.
- On the TE 300, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the TE 300
For the TE 300, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the two-stroke engine and expansion chamber, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the Husqvarna TE 300
Start the designer on the Husqvarna TE 300 with the wave kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More Husqvarna TE 300 graphics styles
Wave graphics for other bikes
Wave Husqvarna TE 300 graphics FAQ
01Do these wave graphics fit my Husqvarna TE 300?
The kit is laid out on the Husqvarna TE 300's panel shapes for the 2027–2027 reference years. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the wave kit on my TE 300?
Yes. Recolor the whole design, or paint single parts. Many Husqvarna riders keep Husqvarna's stock color as the base and use the pattern as an accent.
03Where should the race number go on a TE 300?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design wave dirt bike graphics for the Husqvarna TE 300?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the TE 300 in this catalogue?
The TE 300 is Husqvarna's big two-stroke enduro. Pro and Heritage trim names are grouped with the base model.
Design your wave TE 300 kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing