Tribal Husqvarna FE 350 Graphics Kit
Sharp tribal blades sweep across the plastics and frame the bike's lines. This page puts the tribal kit on the Husqvarna FE 350. The FE 350 is Husqvarna's middleweight four-stroke enduro, separate from the FC 350 motocrosser.
Open it in the designer to see tribal dirt bike graphics mapped to the FE 350's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How tribal graphics fit the FE 350
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
A soft navy-to-white balance suits the lit enduro bodywork; protect the panel edges with generous design margins. Point the blades toward the front of the bike.
Headlight mask
Keep the FE 350 lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous FE 350 panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a tribal FE 350
Tribal starter
The palette the tribal kit opens with.
Husqvarna stock match
Keeps Husqvarna's stock color as the base so the kit looks factory-fresh.
Husqvarna accent
A Husqvarna-inspired palette around the white FE 350 design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- Use one accent color sparingly.
- Tribal shapes look great mirrored on both sides, which DirtBikeGraphics does automatically.
- On the FE 350, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the FE 350
For the FE 350, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the four-stroke engine and exhaust header, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the Husqvarna FE 350
Start the designer on the Husqvarna FE 350 with the tribal kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More Husqvarna FE 350 graphics styles
Tribal graphics for other bikes
Tribal Husqvarna FE 350 graphics FAQ
01Do these tribal graphics fit my Husqvarna FE 350?
The kit is laid out on the Husqvarna FE 350's panel shapes for the 2027–2027 reference years. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the tribal kit on my FE 350?
Yes. Recolor the whole design, or paint single parts. Many Husqvarna riders keep Husqvarna's stock color as the base and use the pattern as an accent.
03Where should the race number go on a FE 350?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design tribal dirt bike graphics for the Husqvarna FE 350?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the FE 350 in this catalogue?
The FE 350 is Husqvarna's middleweight four-stroke enduro, separate from the FC 350 motocrosser.
Design your tribal FE 350 kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing