Tiger Stripe Beta Xtrainer 200 Graphics Kit
Tiger stripes suit orange bikes naturally, but they look just as wild in white, pink or neon green. This page puts the tiger stripe kit on the Beta Xtrainer 200. The Xtrainer 200 is Beta's smaller-capacity Xtrainer two-stroke trail/enduro model, listed in the manufacturer's MY27 catalogue.
Open it in the designer to see tiger stripe dirt bike graphics mapped to the Xtrainer 200's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How tiger stripe graphics fit the Xtrainer 200
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
Rounded two-tone blocks suit the compact Xtrainer covers; keep the rider identity high enough to avoid the pipe area. Match the stripe base to your stock plastics for an OEM-plus look.
Headlight mask
Keep the Xtrainer 200 lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous Xtrainer 200 panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a tiger stripe Xtrainer 200
Tiger stripe starter
The palette the tiger stripe kit opens with.
Beta stock match
Keeps Beta's stock color as the base so the kit looks factory-fresh.
Beta accent
A Beta-inspired palette around the white Xtrainer 200 design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- Thin stripes on the fork guards and swingarm tie the whole kit together.
- Add claw-mark shapes from the Shapes panel for extra bite.
- On the Xtrainer 200, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the Xtrainer 200
For the Xtrainer 200, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the two-stroke engine and expansion chamber, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the Beta Xtrainer 200
Start the designer on the Beta Xtrainer 200 with the tiger stripe kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More Beta Xtrainer 200 graphics styles
Tiger stripe graphics for other bikes
Tiger stripe Beta Xtrainer 200 graphics FAQ
01Do these tiger stripe graphics fit my Beta Xtrainer 200?
The kit is laid out on the Beta Xtrainer 200's panel shapes for the 2027–2027 reference years. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the tiger stripe kit on my Xtrainer 200?
Yes. Recolor the whole design, or paint single parts. Many Beta riders keep Beta's stock color as the base and use the pattern as an accent.
03Where should the race number go on a Xtrainer 200?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design tiger stripe dirt bike graphics for the Beta Xtrainer 200?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the Xtrainer 200 in this catalogue?
The Xtrainer 200 is Beta's smaller-capacity Xtrainer two-stroke trail/enduro model, listed in the manufacturer's MY27 catalogue.
Design your tiger stripe Xtrainer 200 kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing