Lightning Sherco 300 SE Graphics Kit
Electric lightning bolts on a dark base are a natural fit for electric bikes like the Stark Varg, and they look just as loud on a 450. This page puts the lightning kit on the Sherco 300 SE. The 300 SE is Sherco's large two-stroke enduro, distinct from the four-stroke 300 SEF.
Open it in the designer to see lightning dirt bike graphics mapped to the 300 SE's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How lightning graphics fit the 300 SE
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
Place the main emblem above the expansion chamber and leave the rear number on a plain field for trail readability. Neon green or electric blue bolts on navy or black give the strongest contrast.
Headlight mask
Keep the 300 SE lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous 300 SE panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a lightning 300 SE
Lightning starter
The palette the lightning kit opens with.
Sherco stock match
Keeps Sherco's stock color as the base so the kit looks factory-fresh.
Sherco accent
A Sherco-inspired palette around the white 300 SE design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- Layer a thick glow line under a thin bright line.
- Try the holographic finish to make the bolts flicker in the light.
- On the 300 SE, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the 300 SE
For the 300 SE, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the two-stroke engine and expansion chamber, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the Sherco 300 SE
Start the designer on the Sherco 300 SE with the lightning kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More Sherco 300 SE graphics styles
Lightning graphics for other bikes
Lightning Sherco 300 SE graphics FAQ
01Do these lightning graphics fit my Sherco 300 SE?
The kit is laid out on the Sherco 300 SE's panel shapes for the 2027–2027 reference years. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the lightning kit on my 300 SE?
Yes. Recolor the whole design, or paint single parts. Many Sherco riders keep Sherco's stock color as the base and use the pattern as an accent.
03Where should the race number go on a 300 SE?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design lightning dirt bike graphics for the Sherco 300 SE?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the 300 SE in this catalogue?
The 300 SE is Sherco's large two-stroke enduro, distinct from the four-stroke 300 SEF.
Design your lightning 300 SE kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing