Honeycomb Sherco 125 SE Graphics Kit
Hex armor patterns look technical and modern, like carbon or armor plating. This page puts the honeycomb kit on the Sherco 125 SE. The 125 SE is Sherco's small-capacity full-size two-stroke enduro, listed in the Factory 2027 range.
Open it in the designer to see honeycomb dirt bike graphics mapped to the 125 SE's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How honeycomb graphics fit the 125 SE
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
A thin fluorescent accent on the blue-derived shroud shape keeps the narrow 125 body light and readable. Dark cells with orange, lime or cyan accents work best.
Headlight mask
Keep the 125 SE lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous 125 SE panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a honeycomb 125 SE
Honeycomb starter
The palette the honeycomb kit opens with.
Sherco stock match
Keeps Sherco's stock color as the base so the kit looks factory-fresh.
Sherco accent
A Sherco-inspired palette around the white 125 SE design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- Concentrate the accent cells near the front of each panel.
- Matte base plus gloss accents is a strong combo in print.
- On the 125 SE, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the 125 SE
For the 125 SE, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the two-stroke engine and expansion chamber, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the Sherco 125 SE
Start the designer on the Sherco 125 SE with the honeycomb kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More Sherco 125 SE graphics styles
Honeycomb graphics for other bikes
Honeycomb Sherco 125 SE graphics FAQ
01Do these honeycomb graphics fit my Sherco 125 SE?
The kit is laid out on the Sherco 125 SE's panel shapes for the 2027–2027 reference years. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the honeycomb kit on my 125 SE?
Yes. Recolor the whole design, or paint single parts. Many Sherco riders keep Sherco's stock color as the base and use the pattern as an accent.
03Where should the race number go on a 125 SE?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design honeycomb dirt bike graphics for the Sherco 125 SE?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the 125 SE in this catalogue?
The 125 SE is Sherco's small-capacity full-size two-stroke enduro, listed in the Factory 2027 range.
Design your honeycomb 125 SE kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing