Honeycomb Husqvarna TE 125 Graphics Kit
Hex armor patterns look technical and modern, like carbon or armor plating. This page puts the honeycomb kit on the Husqvarna TE 125. The TE 125 is Husqvarna's small-capacity full-size two-stroke enduro, with a headlight mask rather than TC race plates.
Open it in the designer to see honeycomb dirt bike graphics mapped to the TE 125's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How honeycomb graphics fit the TE 125
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
Keep the front motif above the lamp and use narrow trails of colour along the small-bore shroud. Dark cells with orange, lime or cyan accents work best.
Headlight mask
Keep the TE 125 lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous TE 125 panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a honeycomb TE 125
Honeycomb starter
The palette the honeycomb kit opens with.
Husqvarna stock match
Keeps Husqvarna's stock color as the base so the kit looks factory-fresh.
Husqvarna accent
A Husqvarna-inspired palette around the white TE 125 design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- Concentrate the accent cells near the front of each panel.
- Matte base plus gloss accents is a strong combo in print.
- On the TE 125, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the TE 125
For the TE 125, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the two-stroke engine and expansion chamber, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the Husqvarna TE 125
Start the designer on the Husqvarna TE 125 with the honeycomb kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More Husqvarna TE 125 graphics styles
Honeycomb graphics for other bikes
Honeycomb Husqvarna TE 125 graphics FAQ
01Do these honeycomb graphics fit my Husqvarna TE 125?
The kit is laid out on the Husqvarna TE 125's panel shapes for the 2027–2027 reference years. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the honeycomb kit on my TE 125?
Yes. Recolor the whole design, or paint single parts. Many Husqvarna riders keep Husqvarna's stock color as the base and use the pattern as an accent.
03Where should the race number go on a TE 125?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design honeycomb dirt bike graphics for the Husqvarna TE 125?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the TE 125 in this catalogue?
The TE 125 is Husqvarna's small-capacity full-size two-stroke enduro, with a headlight mask rather than TC race plates.
Design your honeycomb TE 125 kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing