Flame KTM 150 XC-W Graphics Kit
Hot-rod flames never really left. This page puts the flame kit on the KTM 150 XC-W. The 150 XC-W is the larger-capacity small-bore two-stroke option within KTM's wide-ratio off-road range.
Open it in the designer to see flame dirt bike graphics mapped to the 150 XC-W's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How flame graphics fit the 150 XC-W
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
Try one bold accent across the upper shroud with quieter fork guards to preserve the light, narrow visual character. Start the flames at the front of each panel and let them trail backward.
Headlight mask
Keep the 150 XC-W lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous 150 XC-W panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a flame 150 XC-W
Flame starter
The palette the flame kit opens with.
KTM stock match
Keeps KTM's stock color as the base so the kit looks factory-fresh.
KTM accent
A KTM-inspired palette around the white 150 XC-W design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- Black or deep red bases make orange and yellow flames look brighter.
- Try a chrome finish on the flames only for a show-bike look.
- On the 150 XC-W, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the 150 XC-W
For the 150 XC-W, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the two-stroke engine and expansion chamber, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the KTM 150 XC-W
Start the designer on the KTM 150 XC-W with the flame kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More KTM 150 XC-W graphics styles
Flame graphics for other bikes
Flame KTM 150 XC-W graphics FAQ
01Do these flame graphics fit my KTM 150 XC-W?
The kit is laid out on the KTM 150 XC-W's panel shapes for the 2027–2027 reference years. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the flame kit on my 150 XC-W?
Yes. Recolor the whole design, or paint single parts. Many KTM riders keep KTM's stock color as the base and use the pattern as an accent.
03Where should the race number go on a 150 XC-W?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design flame dirt bike graphics for the KTM 150 XC-W?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the 150 XC-W in this catalogue?
The 150 XC-W is the larger-capacity small-bore two-stroke option within KTM's wide-ratio off-road range.
Design your flame 150 XC-W kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing