Flame Husqvarna TX 300 Graphics Kit
Hot-rod flames never really left. This page puts the flame kit on the Husqvarna TX 300. The TX 300 is Husqvarna's large two-stroke cross-country race model, distinct from the headlight-equipped TE 300.
Open it in the designer to see flame dirt bike graphics mapped to the TX 300's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How flame graphics fit the TX 300
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
Keep the front plate as a clean number field and place the main motif high above the expansion chamber. Start the flames at the front of each panel and let them trail backward.
Front number area
Keep the main number on a solid contrasting field; inspect its size on the TX 300 preview before adding smaller lettering.
Rear side panels
Place a short name or number on one continuous TX 300 panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a flame TX 300
Flame starter
The palette the flame kit opens with.
Husqvarna stock match
Keeps Husqvarna's stock color as the base so the kit looks factory-fresh.
Husqvarna accent
A Husqvarna-inspired palette around the white TX 300 design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- Black or deep red bases make orange and yellow flames look brighter.
- Try a chrome finish on the flames only for a show-bike look.
- On the TX 300, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the TX 300
For the TX 300, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the two-stroke engine and expansion chamber, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the Husqvarna TX 300
Start the designer on the Husqvarna TX 300 with the flame kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the front number area in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More Husqvarna TX 300 graphics styles
Flame graphics for other bikes
Flame Husqvarna TX 300 graphics FAQ
01Do these flame graphics fit my Husqvarna TX 300?
The kit is laid out on the Husqvarna TX 300's panel shapes for the 2027–2027 reference years. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the flame kit on my TX 300?
Yes. Recolor the whole design, or paint single parts. Many Husqvarna riders keep Husqvarna's stock color as the base and use the pattern as an accent.
03Where should the race number go on a TX 300?
Keep the main number on a solid contrasting field; inspect its size on the TX 300 preview before adding smaller lettering.
04Is it free to design flame dirt bike graphics for the Husqvarna TX 300?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the TX 300 in this catalogue?
The TX 300 is Husqvarna's large two-stroke cross-country race model, distinct from the headlight-equipped TE 300.
Design your flame TX 300 kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing