Flame Husqvarna FE 250 Graphics Kit
Hot-rod flames never really left. This page puts the flame kit on the Husqvarna FE 250. The FE 250 is the quarter-litre four-stroke Husqvarna enduro, with a headlight and FE-family panels.
Open it in the designer to see flame dirt bike graphics mapped to the FE 250's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How flame graphics fit the FE 250
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
Keep the rear number field simple and run a slim accent past the radiator intake rather than across the opening. Start the flames at the front of each panel and let them trail backward.
Headlight mask
Keep the FE 250 lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous FE 250 panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a flame FE 250
Flame starter
The palette the flame kit opens with.
Husqvarna stock match
Keeps Husqvarna's stock color as the base so the kit looks factory-fresh.
Husqvarna accent
A Husqvarna-inspired palette around the white FE 250 design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- Black or deep red bases make orange and yellow flames look brighter.
- Try a chrome finish on the flames only for a show-bike look.
- On the FE 250, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the FE 250
For the FE 250, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the four-stroke engine and exhaust header, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the Husqvarna FE 250
Start the designer on the Husqvarna FE 250 with the flame kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More Husqvarna FE 250 graphics styles
Flame graphics for other bikes
Flame Husqvarna FE 250 graphics FAQ
01Do these flame graphics fit my Husqvarna FE 250?
The kit is laid out on the Husqvarna FE 250's panel shapes for the 2027–2027 reference years. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the flame kit on my FE 250?
Yes. Recolor the whole design, or paint single parts. Many Husqvarna riders keep Husqvarna's stock color as the base and use the pattern as an accent.
03Where should the race number go on a FE 250?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design flame dirt bike graphics for the Husqvarna FE 250?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the FE 250 in this catalogue?
The FE 250 is the quarter-litre four-stroke Husqvarna enduro, with a headlight and FE-family panels.
Design your flame FE 250 kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing