Flame Fantic XEF 250 Graphics Kit
Hot-rod flames never really left. This page puts the flame kit on the Fantic XEF 250. The XEF 250 is Fantic's MY26 quarter-litre four-stroke enduro; Fantic documents revised bodywork and a new light mask for this generation.
Open it in the designer to see flame dirt bike graphics mapped to the XEF 250's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How flame graphics fit the XEF 250
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
Follow the updated shroud creases with separate colour blocks and verify MY26 cut lines rather than assuming the earlier panels fit. Start the flames at the front of each panel and let them trail backward.
Headlight mask
Keep the XEF 250 lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous XEF 250 panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a flame XEF 250
Flame starter
The palette the flame kit opens with.
Fantic stock match
Keeps Fantic's stock color as the base so the kit looks factory-fresh.
Fantic accent
A Fantic-inspired palette around the white XEF 250 design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- Black or deep red bases make orange and yellow flames look brighter.
- Try a chrome finish on the flames only for a show-bike look.
- On the XEF 250, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the XEF 250
For the XEF 250, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the four-stroke engine and exhaust header, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the Fantic XEF 250
Start the designer on the Fantic XEF 250 with the flame kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More Fantic XEF 250 graphics styles
Flame graphics for other bikes
Flame Fantic XEF 250 graphics FAQ
01Do these flame graphics fit my Fantic XEF 250?
The kit is laid out on the Fantic XEF 250's panel shapes for the 2026–2026 reference years. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the flame kit on my XEF 250?
Yes. Recolor the whole design, or paint single parts. Many Fantic riders keep Fantic's stock color as the base and use the pattern as an accent.
03Where should the race number go on a XEF 250?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design flame dirt bike graphics for the Fantic XEF 250?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the XEF 250 in this catalogue?
The XEF 250 is Fantic's MY26 quarter-litre four-stroke enduro; Fantic documents revised bodywork and a new light mask for this generation.
Design your flame XEF 250 kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing