Carbon Fiber KTM 125 XC-W Graphics Kit
A carbon weave print with thin accent lines gives a stealthy, factory look without the cost of real carbon parts. This page puts the carbon fiber kit on the KTM 125 XC-W. The 125 XC-W is KTM's small-capacity full-size two-stroke off-road model in the wide-ratio XC-W family.
Open it in the designer to see carbon fiber dirt bike graphics mapped to the 125 XC-W's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How carbon fiber graphics fit the 125 XC-W
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
Fine forward-pointing chevrons suit the slim engine area; keep the main race identity above the side-panel crease. Pair with black rims and a dark frame for a murdered-out build.
Headlight mask
Keep the 125 XC-W lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous 125 XC-W panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a carbon fiber 125 XC-W
Carbon fiber starter
The palette the carbon fiber kit opens with.
KTM stock match
Keeps KTM's stock color as the base so the kit looks factory-fresh.
KTM accent
A KTM-inspired palette around the white 125 XC-W design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- One bright accent line is enough.
- Gloss finish makes the weave look like the real thing.
- On the 125 XC-W, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the 125 XC-W
For the 125 XC-W, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the two-stroke engine and expansion chamber, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the KTM 125 XC-W
Start the designer on the KTM 125 XC-W with the carbon fiber kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More KTM 125 XC-W graphics styles
Carbon fiber graphics for other bikes
Carbon fiber KTM 125 XC-W graphics FAQ
01Do these carbon fiber graphics fit my KTM 125 XC-W?
The kit is laid out on the KTM 125 XC-W's panel shapes for the 2027–2027 reference years. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the carbon fiber kit on my 125 XC-W?
Yes. Recolor the whole design, or paint single parts. Many KTM riders keep KTM's stock color as the base and use the pattern as an accent.
03Where should the race number go on a 125 XC-W?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design carbon fiber dirt bike graphics for the KTM 125 XC-W?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the 125 XC-W in this catalogue?
The 125 XC-W is KTM's small-capacity full-size two-stroke off-road model in the wide-ratio XC-W family.
Design your carbon fiber 125 XC-W kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing