Carbon Fiber Husqvarna TE 150 Graphics Kit
A carbon weave print with thin accent lines gives a stealthy, factory look without the cost of real carbon parts. This page puts the carbon fiber kit on the Husqvarna TE 150. The TE 150 is Husqvarna's larger small-bore two-stroke enduro, using the lit TE front end.
Open it in the designer to see carbon fiber dirt bike graphics mapped to the TE 150's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How carbon fiber graphics fit the TE 150
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
A single diagonal colour break works well around the slim tank-side area while preserving a calm rear name zone. Pair with black rims and a dark frame for a murdered-out build.
Headlight mask
Keep the TE 150 lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous TE 150 panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a carbon fiber TE 150
Carbon fiber starter
The palette the carbon fiber kit opens with.
Husqvarna stock match
Keeps Husqvarna's stock color as the base so the kit looks factory-fresh.
Husqvarna accent
A Husqvarna-inspired palette around the white TE 150 design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- One bright accent line is enough.
- Gloss finish makes the weave look like the real thing.
- On the TE 150, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the TE 150
For the TE 150, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the two-stroke engine and expansion chamber, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the Husqvarna TE 150
Start the designer on the Husqvarna TE 150 with the carbon fiber kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More Husqvarna TE 150 graphics styles
Carbon fiber graphics for other bikes
Carbon fiber Husqvarna TE 150 graphics FAQ
01Do these carbon fiber graphics fit my Husqvarna TE 150?
The kit is laid out on the Husqvarna TE 150's panel shapes for the 2027–2027 reference years. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the carbon fiber kit on my TE 150?
Yes. Recolor the whole design, or paint single parts. Many Husqvarna riders keep Husqvarna's stock color as the base and use the pattern as an accent.
03Where should the race number go on a TE 150?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design carbon fiber dirt bike graphics for the Husqvarna TE 150?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the TE 150 in this catalogue?
The TE 150 is Husqvarna's larger small-bore two-stroke enduro, using the lit TE front end.
Design your carbon fiber TE 150 kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing