Carbon Fiber GasGas EC 300 Graphics Kit
A carbon weave print with thin accent lines gives a stealthy, factory look without the cost of real carbon parts. This page puts the carbon fiber kit on the GasGas EC 300. The EC 300 is the GASGAS large two-stroke enduro, with a headlight mask and a curved expansion chamber beneath the shroud.
Open it in the designer to see carbon fiber dirt bike graphics mapped to the EC 300's own panels, change the colors, and add your number and logos before you export artwork for your printer.
How carbon fiber graphics fit the EC 300
Where the pattern shows best on this bike, panel by panel.
Tank-side covers / shrouds
Keep the lamp opening clear and place the strongest colour on the upper panels above the pipe. Pair with black rims and a dark frame for a murdered-out build.
Headlight mask
Keep the EC 300 lamp lens and mask openings clear. Artwork belongs on the surrounding plastic, not across the light.
Rear side panels
Place a short name or number on one continuous EC 300 panel. Keep letters away from fasteners, panel gaps and the seat edge.
Color ideas for a carbon fiber EC 300
Carbon fiber starter
The palette the carbon fiber kit opens with.
GasGas stock match
Keeps GasGas's stock color as the base so the kit looks factory-fresh.
GasGas accent
A GasGas-inspired palette around the white EC 300 design preview. The illustration is not a stock-colour specification.
White and charcoal
Use the darker field behind the rider number, with the brand colour as a narrow connecting accent.
Design tips
- One bright accent line is enough.
- Gloss finish makes the weave look like the real thing.
- On the EC 300, the tank-side covers / shrouds carry the most artwork, so check the pattern there first.
Installing on the EC 300
For the EC 300, first match the installed plastics and the printer's cut-line file. Keep vinyl away from the two-stroke engine and expansion chamber, vents, access openings and moving parts. Follow your vinyl supplier's preparation instructions.
Make it yours in 4 steps
- 1
Open the GasGas EC 300
Start the designer on the GasGas EC 300 with the carbon fiber kit already applied.
- 2
Set your colors
Recolor the kit, or paint single parts like the headlight mask in a solid color or pattern.
- 3
Add your number and logos
Put your race number on the plates and upload sponsor or team logos onto any panel.
- 4
Export for print
Download free watermarked previews, or HD renders and the flat graphics sheet for your printer to size and cut.
More GasGas EC 300 graphics styles
Carbon fiber graphics for other bikes
Carbon fiber GasGas EC 300 graphics FAQ
01Do these carbon fiber graphics fit my GasGas EC 300?
The kit is laid out on the GasGas EC 300's panel shapes for the 2027–2027 reference years. Bodywork can change between model years, so ask your printer to match the cut template to your exact year and fitted plastics.
02Can I change the colors of the carbon fiber kit on my EC 300?
Yes. Recolor the whole design, or paint single parts. Many GasGas riders keep GasGas's stock color as the base and use the pattern as an accent.
03Where should the race number go on a EC 300?
Use a solid, high-contrast plate color and keep the pattern away from the digits so the number reads from the stands.
04Is it free to design carbon fiber dirt bike graphics for the GasGas EC 300?
Designing and previewing are free. AI designs and clean HD exports use credits from one-time packs, with no subscription.
05What distinguishes the EC 300 in this catalogue?
The EC 300 is the GASGAS large two-stroke enduro, with a headlight mask and a curved expansion chamber beneath the shroud.
Design your carbon fiber EC 300 kit
Pick your bike, design the kit, and only pay for AI designs and HD exports.
Start designing